SAMOA Directflo DF100 Air Operated Oil Diaphragm Pump

The Piusi Amalfi Water Transfer Pump is a self-priming flexible impeller pump suitable for the transfer of clean, dirty and sale water. Thanks to its flexible impeller design, the Amalfi Piusi pump is capable of handling solid particles and debris without causing damage to the pump. There are both mains and low voltage versions available, with the low voltage version being traditionally designed for the pumping of bilge water in marine applications.

The Stainless Steel Lockable Lever Ball Valve is designed for applications where brass is not suitable. This version of ball valve is therefore used for installations with more aggressive fluids such as AdBlue™ and chemical fluid pipelines. The lockable lever ball valves can be locked using a padlock in either the open or closed position, and the locking device covers the stem nut, which means that if the padlock is on, the lever is impossible to remove.

This valve us fatted with an Anti-blowout stem and PTFE seals. PN63 Rating, Temperature -10°C to 180°C.

This remote dispensing cabinet can be designed to suit any installation, and fitted with pumps and other equipment. Please contact us to obtain a quote.

The Hytek SPT60A Diesel Transfer Pump is a low cost, high quality Fuel pump. Due to the design of this pump, it can replace similar types of pumps as the location of the Inlet/Outlet ports & Footprint of the pump are the same as many others. With a low noise output & a 56 Litre per minute maximum flow rate, the SPT60A from Hytek is an economical choice for diesel transfer.

Hytek 230v Diesel Pump Specification -

230v 50hz Pump

On / Off Switch

IP55 Weather Protection

2 Metre Power Cable

1" BSPP Female Inlet / Outlet

Duty Cycle: 30 minutes

56 L/min maximum flow rate

Integral Bypass valve

Suitable for Diesel or Biodiesel

2 Year Warranty