SAMOA 3:1 Air Operated Oil Transfer Pump - Pumpmaster 2

The Tanker Reeling Fuel Delivery Hose is designed for fitting onto domestic fuel oil tankers for the bulk delivery of kerosene and diesel fuels into a storage tank.

This fuel oil tanker hose is available in 61m assemblies with either M x M or M x F heavy duty brass couplings with aluminium hose clamps. It is also offered as an open ended coil should you wish to add your own hose fittings. Available upon special request is a 35mm OD version of this fuel dispensing hose.

The Piusi K500 Preset Oil Nozzle is designed to perform the pre-selected dispensing of oil through use of its automatic spout. Using this spout, the meter incorporated in the nozzle automatically closes the valve when the pre-selected quantity has been dispensed. These Piusi oil nozzles have a trigger protection to prevent accidental operation outside of the pre-select dispense, and a pressure moulded body that is resistant to high pressures.

70 or 100 litre waste oil gravity & suction collection units with transparent chamber from SAMOA. Units include a 10 litres transparent chamber that can be used as a vacuum reservoir and allows an immediate inspection of the extracted waste oil. They can be used remotely once vacuum is created inside the steel reservoir. Discharge through a 1,5 m discharge hose pressurizing the unit. Includes safety valve to avoid over pressurization.

The Afriso DTA10 is an electro-pneumatic tank contents gauge is powered by a 9V battery operated control unit with a digital display. The values are displayed in litres, percentage and CM. The DTA10 is easy to set up requiring use of only 3 function keys.

Measurements are shown on the gauge when the control button is pressed. If the liquid is below a pre-set level then the display will flash red to warn of low level.

The gauge is suitable for most tanks up to a height of 4 metres (3.5 metres for water) with pre-stored tank shapes of Horizontal, linear, spherical and cylindrical.