The ALPHA pump range are heavy duty ATEX certified diesel pumps which can be equipped with the comprehensive FC10 fuel management system, or easily be connected to a different system. Thanks to its robust construction, the ALPHA pumps will last years in service and are simple to maintain.

The unit can be modified to allow the holster to be mounted on either side, or the front of the unit.

Standard ALPHA pump specification -

4 Piston Flow Meter - +/- 0.25% Accuracy

LCD Display with back light. Shows up to 99,999.9 litres, totaliser shows up to 99,999,999 litres.

Uses virtually indestructable key tags - up to 65,000 on a system

Vehicle tag, odometer entry, odometer check & MPG calculation

Optional driver code &/or pin code entry 

GPRS modem for remote access

Web based software

Flexible report writer enables a wide range of fuel usage analysis by vehicle, department, vehicle type, fuel type, time & date 

Includes CO2 output readings

Multiple site capability & data consolidation

All features included as standard. No optional extras to purchase

Mobile app available for monitoring on phone or tablet

Mild steel rigid bunded container with steel portable bund fully welded with mechanical handling base and top lifting facility.  Both the inner and outer tanks are constructed from mild steel plate to BS EN 10025.

The unit is manufactured with an integrally bunded tank with capacity to hold an additional 10% of the total liquid being stored which is then fitted within a steel outer bund providing a secondary bund to the main storage tank. A bulk head is fitted in front of the storage tank to provide an area in which all the tanks control and dispensing equipment is housed.  A steel roller shutter door is provided for increased security

These units are built to the same stringent standards as the UN approved Fuel Bank range, and capable of being lifted and transported around site when full.

Compliancy:

BS799 part 5,

Control of pollution (oil storage) (England) regulations 2001

PPG2

PPG26

The O.L.E C2020 is a high accuracy electronic gauge for use with fuel tanks that are up to 3m or 5m high. Designed for use outdoors, the C2020 tank gauge features an IP65 rated enclosed, and an easy to read backlit display which indicates the contents of the fuel tank as a percentage, and in litres.

The C2020 provides a continuous reading of the contents inside the tank, and can be equipped with an alarm to also act as a leak/overfill alarm.

Thanks to the design, this electronic tank gauge can be used to give accurate readings of any shaped tank.

C2020 tank gauges come as standard with 4-20mA outputs, and so can be connected to BMS (Building Management Systems).

O.L.E C2020 Gauge Specifications -

Suitable for any shape tank

+/- 1% Accuracy

Suitable for use with Diesel, B100 Biodiesel, AdBlue & Antifreeze

Backlit electronic display

Gives continuous readout in litres (screen also shows a % bar)

Includes 4-20mA outputs

Can connect to BMS System

Weatherproof to IP65

Power supply can be 230v, 110v or 24v DC