Push Button Tank Sight Gauge

The Piusi Oil AODD Pump has been designed to transfer oil with high viscosities by using an NBR diaphragm. This Air Operated Diaphragm Pump uses air in order to transfer clean and contaminated oils such as the suspended solids found in spent oil. These oil pumps have no mains connector because they are powered by air, and are often used in garages and workshops where air lines are already set up.

Each model varies on port size from ½” to 1 ½” G Port, as well as flow rate, ranging from 50 l/min to 220l/min for bigger installations. The Piusi Oil Transfer Pumps have been made suitable for severe duty conditions or operations taking place in potentially explosive atmospheres. These brand new AODD Pumps are the first of its type to be introduced into the Piusi pump range.

This high quality diesel transfer pump from FMT Swiss AG is manufactured from shock resistant Die-cast aluminium with extremely small tolerances. The small tolerances of this pump allow for great suction & pressure performance.

Fitted with an on/off switch, integral bypass & siphon protection, this 110v transfer pump is designed for a long service life and is capable of a 5 metre suction.

This transfer pump from FMT has an encapsulated electric motor, which in case of extreme temperature fluctuations, largely prevents the formation of condensed water and of short-circuits resulting thereof.

Specification - 

Continuous Operation

1.8 metre cable

1" BSP Inlet / Outlet

Self Priming Vane Pump with integral bypass

60 Litres per minute maximum flow rate

Up to 1.8 bar discharge pressure

5 Metre maximum suction height

Suitable for Fuel oils & Diesel

110v 50hz

Self resetting Thermal Protection

IP54 Safety rating

FKM Seals

3 year warranty

Aluminium automatic nozzle designed for delivering diesel. It is light, robust and includes a trigger latching mechanism to ease fluid delivery at different flow rates and an aluminium swivel to 1" BSP F to allow an easy hose connection.

The SAMOA Polux Series of DC Vane Pumps are high quality self priming pumps manufactured in Spain. These pumps come in either 12v or 24v, with flow rates of 40lpm or 60lpm (Depending on model). The pump body is made of cast-iron with rustproof treatment, rotor of sintered steel and vanes of acetal resin. The pumps include a by-pass valve and a built in filter with easy access for cleaning. The pump can be mounted vertically or horizontally, has a carrying handle and 2m cable with crocodile clamps.

Inlet/outlet connection: 1" BSP (F) or flange coupling

Maximum suction lift: 2.5m

Pressure: 0.8 bar

Electric DC motor with IP55 protection, allow intermittent operation duty with maximum cycles of 30 minutes.

On/off switch and fuse.

Pump Spec -

684 530 - 12v DC Diesel Pump - 22 amp - 140 watt - 40 litre/min

684 451 - 12v DC Diesel Pump - 38 amp - 220 watt - 60 litre/min

684 531 - 24v DC Diesel Pump - 13 amp - 160 watt - 43 litre/min

684 450 - 24v DC Diesel Pump - 25 amp - 240 watt - 65 litre/min