Professional ATEX Automatic Diesel Nozzle

The Parker Carbopress Diesel Delivery Hose is a well-known brand of strong and durable fuel hose. Usually supplied as standard on the Piusi pump kits e.g. Cube, ST and Drum range, this diesel hose is often purchased as a replacement for an existing pumping installation. The Parker fuel dispensing hose is available in 4m and 6m assemblies as standard, but can also be purchased in coils or by the metre should you have differing requirements. A petrol version is also available.

Aquafighter Large Canvas is a fuel tank water absorber designed to remove both free and suspended/emulsified water out of diesel fuel directly in the tank, therefore providing a complete solution for water contamination. Aquafighter Canvas comes in two sizes, Medium and Large, depending on the size of the fuel storage tank. The diesel and oil tank water absorber is typically used for removing water from bulk fuel storage tanks and generator tanks.

The medium size is suitable for a tank with a capacity of up to 5,000 litres with the access of at least 12cm and the large size for a capacity of up to 10,000 litres with the access of at least 16cm. Both sizes of the fuel tank water absorber can be manipulated through tank opening but not through a long pipe.

The bound and free water in a storage tank can cause issues associated with microbial growth, known as "diesel bugs", which is responsible for creating a nasty sludge that blocks filters, damages your equipment, causes engine system corrosion and poor fuel efficiency. The Aquafighter water absorber eliminates these problems by reducing the water content levels down to 75ppm to meet the EN590 diesel fuel standards (200ppm) and saving you costly damage and downtime. Unlike other solutions on the market, this diesel tank water absorber not only removes free water but also separates and captures the suspended and emulsified water, which often gets left to cause serious damage to your vehicles and equipment. 

By doing this, the Aquafighter Canvas fuel tank water absorber provides numerous benefits including preventing diesel bug from forming, reducing filter replacements and need for tank cleaning and protecting the tank from corrosion. 

Please note: If this is your first time using Aquafighter, we recommend buying 2 units. The first can be added to absorb the current water, which may become full quickly if there is a large problem with water. The second to be added once the other has been removed to act as a prevention against future water content.

The Husky Nozzle Service Kit is a complete kit for the removal and installation of nozzles in a clean and simple way – for use with Husky nozzles and other styles of forecourt nozzle. The service kit comes with a stainless steel pail, nozzle holder – which keeps the fuel nozzle off the floor, breakaway drain cup and a fuel filter drain cup.

The kit provides a safe way of collecting fuel when the Husky nozzle, breakaway and filter are taken apart – allowing the remaining fuel from each part to be drained safely into the provided containers. Each of the drainage containers allow any brand and style of nozzle, breakaway or filter to be used with the kit. The pail also doubles up as a container for all the components, so that the kit can be easily transported.

The SAMOA Pumpmaster 2 3:1 is a double acting air operated medium pressure pump for transferring lubricants. These pumps are suitable for lubricants, transmission fluid, hydraulic oils and gear oil.

This oil transfer pump kit for drums comes complete with a 3m delivery hose, and a choice of delivery nozzles.