Heating Oil Tanks

The Afriso DTA10 is an electro-pneumatic tank contents gauge is powered by a 9V battery operated control unit with a digital display. The values are displayed in litres, percentage and CM. The DTA10 is easy to set up requiring use of only 3 function keys.

Measurements are shown on the gauge when the control button is pressed. If the liquid is below a pre-set level then the display will flash red to warn of low level.

The gauge is suitable for most tanks up to a height of 4 metres (3.5 metres for water) with pre-stored tank shapes of Horizontal, linear, spherical and cylindrical.

The Filstop 2" Overfill Prevention Valve is designed to act as the fill point for both metal and plastic tanks. The valve physically closes the inlet to the tank when the fuel level inside reaches it's maximum during a fuel delivery. This prevents damage to the tank, and environment as well as the costs associated with cleaning spilt fuel.

The steel tank version screws straight into the 2" BSP Inlet, whereas the plastic version requires a hole to be cut into the top of the tank for fixing via locknut.

Maximum Flow Rate – 580lpm

Minimum Flow Rate – 50lpm

Leak Rate when closed – 2.5lpm

Max Working Pressure – 7 Bar (Tested to 8 bar)

Max Spike Pressure – 12 Bar

Min Working Pressure – 0.15 bar

Tank Fitting – 2″ BSP Parallel Male Thread

The M200V Fuel Tank Float Gauge from Watts Industries is a small mechanical clock gauge for measuring the tanks contents by a float that sits on the fuel and goes up and down with the level. Whilst also popular for diesel storage tanks, it is most commonly used as a domestic heating oil tank gauge.

These oil tank gauges are supplied as standard with 1 1⁄2” BSP Male for easy fitting on the top of the storage tank or drum.

This 9250-litre capacity slimline environment-friendly bunded oil tank by Harlequin is suitable for the storage of heating oil in a domestic or commercial set up where space is at a premium. Equipped with a range of fittings, including an ultrasonic contents gauge and Tanktop top offtake fitting this top outlet tank provides a complete solution for a fully compliant installation.

Made from Medium Density Polyethylene (MDPE), this tank is lightweight, durable, non-corrosive, simple to install and aesthetically pleasing.

The Harlequin 9250ITT comes complete with -

Atkinson Tanktop top offtake fitting (c/w integral anti-siphon valve, non-return valve, 50Mic filter & priming button)

16" lockable access lid

4" lockable inspection cap

2" BSP fill point

32mm hole with cover for electronic gauge

Ultrasonic contents gauge

LRC overfill prevention probe

Inner tank vent

Moulded-in handles

10 year guarantee

This 7500-litre capacity slimline environment-friendly bunded oil tank by Harlequin is suitable for the storage of heating oil in a domestic or commercial set up where space is at a premium. Equipped with a range of fittings, including an ultrasonic contents gauge and Tanktop top offtake fitting this top outlet tank provides a complete solution for a fully compliant installation.

Made from Medium Density Polyethylene (MDPE), this tank is lightweight, durable, non-corrosive, simple to install and aesthetically pleasing.

The Harlequin 7500ITT comes complete with -

Atkinson Tanktop top offtake fitting (c/w integral anti-siphon valve, non-return valve, 50Mic filter & priming button)

16" lockable access lid

4" lockable inspection cap

2" BSP fill point

32mm hole with cover for electronic gauge

Ultrasonic contents gauge

LRC overfill prevention probe

Inner tank vent

Moulded-in handles

10 year guarantee

This 5400-litre capacity slimline environment-friendly bunded oil tank by Harlequin is suitable for the storage of heating oil in a domestic or commercial set up where space is at a premium. Equipped with a range of fittings, including an ultrasonic contents gauge and Tanktop top offtake fitting this top outlet tank provides a complete solution for a fully compliant installation.

Made from Medium Density Polyethylene (MDPE), this tank is lightweight, durable, non-corrosive, simple to install and aesthetically pleasing.

The Harlequin 5400ITT comes complete with -

Atkinson Tanktop top offtake fitting (c/w integral anti-siphon valve, non-return valve, 50Mic filter & priming button)

16" lockable access lid

4" lockable inspection cap

2" BSP fill point

32mm hole with cover for electronic gauge

Ultrasonic contents gauge

LRC overfill prevention probe

Inner tank vent

Moulded-in handles

10 year guarantee

This 3500-litre capacity slimline environment-friendly bunded oil tank by Harlequin is suitable for the storage of heating oil in a domestic or commercial set up where space is at a premium. Equipped with a range of fittings, including an ultrasonic contents gauge and Tanktop top offtake fitting this top outlet tank provides a complete solution for a fully compliant installation.

Made from Medium Density Polyethylene (MDPE), this tank is lightweight, durable, non-corrosive, simple to install and aesthetically pleasing.

The Harlequin 3500ITT comes complete with -

Atkinson Tanktop top offtake fitting (c/w integral anti-siphon valve, non-return valve, 50Mic filter & priming button)

16" lockable access lid

4" lockable inspection cap

2" BSP fill point

32mm hole with cover for electronic gauge

Ultrasonic contents gauge

LRC overfill prevention probe

Inner tank vent

Moulded-in handles

10 year guarantee

This 2525-litre capacity slimline environment-friendly bunded oil tank by Harlequin is suitable for the storage of heating oil in a domestic or commercial set up where space is at a premium. Equipped with a range of fittings, including an ultrasonic contents gauge and Tanktop top offtake fitting this top outlet tank provides a complete solution for a fully compliant installation.

Made from Medium Density Polyethylene (MDPE), this tank is lightweight, durable, non-corrosive, simple to install and aesthetically pleasing.

The Harlequin 2525ITT comes complete with -

Atkinson Tanktop top offtake fitting (c/w integral anti-siphon valve, non-return valve, 50Mic filter & priming button)

16" lockable access lid

4" lockable inspection cap

2" BSP fill point

32mm hole with cover for electronic gauge

Ultrasonic contents gauge

LRC overfill prevention probe

Inner tank vent

Moulded-in handles

10 year guarantee

This 2500-litre capacity slimline environment-friendly bunded oil tank by Harlequin is suitable for the storage of heating oil in a domestic or commercial set up where space is at a premium. Equipped with a range of fittings, including an ultrasonic contents gauge and Tanktop top offtake fitting this top outlet tank provides a complete solution for a fully compliant installation.

Made from Medium Density Polyethylene (MDPE), this tank is lightweight, durable, non-corrosive, simple to install and aesthetically pleasing.

The Harlequin 2500ITT comes complete with -

Atkinson Tanktop top offtake fitting (c/w integral anti-siphon valve, non-return valve, 50Mic filter & priming button)

16" lockable access lid

4" lockable inspection cap

2" BSP fill point

32mm hole with cover for electronic gauge

Ultrasonic contents gauge

LRC overfill prevention probe

Inner tank vent

Moulded-in handles

10 year guarantee

This 2000-litre capacity slimline environment-friendly bunded oil tank by Harlequin is suitable for the storage of heating oil in a domestic or commercial set up where space is at a premium. Equipped with a range of fittings, including an ultrasonic contents gauge and Tanktop top offtake fitting this top outlet tank provides a complete solution for a fully compliant installation.

Made from Medium Density Polyethylene (MDPE), this tank is lightweight, durable, non-corrosive, simple to install and aesthetically pleasing.

The Harlequin 2000ITT comes complete with -

Atkinson Tanktop top offtake fitting (c/w integral anti-siphon valve, non-return valve, 50Mic filter & priming button)

16" lockable access lid

4" lockable inspection cap

2" BSP fill point

32mm hole with cover for electronic gauge

Ultrasonic contents gauge

LRC overfill prevention probe

Inner tank vent

Moulded-in handles

10 year guarantee

This 1400-litre capacity slimline environment-friendly bunded oil tank by Harlequin is suitable for the storage of heating oil in a domestic or commercial set up where space is at a premium. Equipped with a range of fittings, including an ultrasonic contents gauge and Tanktop top offtake fitting this top outlet tank provides a complete solution for a fully compliant installation.

Made from Medium Density Polyethylene (MDPE), this tank is lightweight, durable, non-corrosive, simple to install and aesthetically pleasing.

The Harlequin 1400ITT comes complete with -

Atkinson Tanktop top offtake fitting (c/w integral anti-siphon valve, non-return valve, 50Mic filter & priming button)

16" lockable access lid

4" lockable inspection cap

2" BSP fill point

32mm hole with cover for electronic gauge

Ultrasonic contents gauge

LRC overfill prevention probe

Inner tank vent

Moulded-in handles

10 year guarantee

This 1300-litre capacity slimline environment-friendly bunded oil tank by Harlequin is suitable for the storage of heating oil in a domestic or commercial set up where space is at a premium. Equipped with a range of fittings, including an ultrasonic contents gauge and Tanktop top offtake fitting this top outlet tank provides a complete solution for a fully compliant installation.

Made from Medium Density Polyethylene (MDPE), this tank is lightweight, durable, non-corrosive, simple to install and aesthetically pleasing.

The Harlequin 1300ITT comes complete with -

Atkinson Tanktop top offtake fitting (c/w integral anti-siphon valve, non-return valve, 50Mic filter & priming button)

16" lockable access lid

4" lockable inspection cap

2" BSP fill point

32mm hole with cover for electronic gauge

Ultrasonic contents gauge

LRC overfill prevention probe

Inner tank vent

Moulded-in handles

10 year guarantee