Plastic High Flow Chemical Hand Pump

The Professional Automatic Diesel Nozzle is designed for the non-resale refuelling of cars and commercial vehicles thanks to its small spout diameter. As an automatic fuel pump nozzle, the Professional will shut off when the vehicle tank is at capacity, which prevents an overflow scenario from being possible and therefore allows for the safe use of the integrated stay open latch. This fuel nozzle, which has a maximum flow rate of 80 litres per minute, is available in two versions; a version for diesel only and a version that is able to handle biodiesel up to B100.

Please note: Due to the thicker nature of the fluid, the B100 refuelling nozzle does not have a trigger latch for safety purposes.

Not suitable for gravity fed applications.

The Aquafighter Snake is a fuel tank water absorber designed to remove both free and suspended/emulsified water from fuel tanks of industrial machines, boats, and fuel storage tanks with small openings such as generator belly tanks.

The increase of bio content in fuel means that there is a rising issue associated with water contamination and microbial growth, which is responsible for a nasty sludge that blocks filters, damages equipment, corrodes engines and causes poor fuel efficiency. The Aquafighter water absorber eliminates these problems by reducing the water content levels down to 75ppm to meet the EN590 diesel fuel standards (200ppm), saving you costly damage and downtime. The diesel tank water absorber not only absorbs free water like other solutions on the market but also separates and captures the suspended and emulsified water in the fuel, which often gets left to cause serious damage to your vehicles and equipment. 

By working in this way, the Aquafighter Snake fuel tank water absorber provides numerous benefits including preventing diesel bug from forming, reducing filter replacement and need for tank cleaning and protecting the tank from corrosion. 

Please note: If this is your first time using Aquafighter, we recommend buying 2 units. The first can be added to absorb the current water, which may become full quickly if there is a large problem with water. The second to be added once the other has been removed to act as a prevention against future water content.

The Adam Pumps PA1 70 Diesel Transfer Pump is a low cost, high quality Fuel pump manufactured in Italy. Due to the design of this pump, it can replace similar types of pumps as the location of the Inlet/Outlet ports & Footprint of the pump are the same as many others. With a low noise output & a 66 Litre per minute maximum flow rate, the PA1 70 from Adam Pumps is an economical choice for diesel transfer.

Adam Pumps 230v PA1 70 Specification -

230v 50hz Pump

On / Off Switch

IP55 Weather Protection

2 Metre Power Cable

1" BSPP Female Inlet / Outlet

Duty Cycle: Continuous Duty

70 L/min maximum flow rate

Max pressure: 2 bar

Integral Bypass valve

-20/+50 °C maximum operating temperature

Suitable for Diesel Only

1 Year Warranty

Maintenance pillows designed for day to day proactive housekeeping applications or for use as part of your spill response programme for absorbing deep spills. They are great for lining drip trays or disassembling expensive valves on as they will absorb any residues that escape when the component is opened up.