2" BSP Plastic Filler Cap & Chain

The Piusi Ocio Fuel Tank Gauge is a continuous reading, hydrostatic digital tank level monitoring device designed primarily for commercial diesel fuel tanks. Once calibrated using the specific tank measurements, the Piusi Ocio electronically displays the tank level reading in mm, litre or percentage depending upon the user preference.

This fuel tank level gauge allows the user to configure low and high level status alerts, which upon activation causes the LED screen to flash to visually alert the user that the level has been reached for them to take action. It also benefits from two configurable relays for sending the high/low level alert statuses to other equipment e.g. a low level tank alarm for an audiable alert, a remote building management system or to the pump on the tank to turn it off e.g. in day tank filling.

The Piusi Ocio gauge is a versatile fuel tank level indicator suitable for use on vertical cylindrical, horizontal cylindrical and rectangular tanks up to 4m high. Whilst the standard model is designed primarily for diesel, there is an AdBlue™ tank gauge version available and a kit to make the standard Ocio compatible with oil popular in garage and workshop environments. There is also a 4-20ma output model available to allow you to send the level readings to a building management system, whereas the standard model would only send the set high/level alarm statuses to the BMS.

The Piusi K44 Fuel Pulse Meter was developed to accurately count how much diesel has been used, using a nutating disk system. This Piusi diesel pulse meter is suitable for use in industrial applications where fluid delivery control is required at highly accurate levels. They can also be used in conjunction with a non-commercial fuel delivery pump either part of or externally inline. The K44 fuel flow meter with pulse output is a cost effective solution to measuring the flow of fuel up to 9999.9 litres at a time. Thanks to their wide flow range, these Piusi flow meters are compatible with a range of pumping installations.

The Piusi Premium Rotary Manual Diesel Pump is specially designed for the transfer of diesel from an IBC. This hand fuel pump is a perfect cost-effective dispensing solution where there is no access to power, or where the quantity dispensed is not high enough to warrant a more expensive electric pump. 

Carefully designed by the leading Italian manufacturer of fluid handling equipment, Piusi, this manual diesel pump has a higher specification compared to other hand pumps on the market. Built with Stainless Steel outer casing as opposed to plastic, this Piusi diesel transfer pump kit is more durable, giving it a longer life span. It also benefits from smooth operation thanks to its rolling handle grip and quality constructed internals. 

Designed specifically as an IBC fuel pump, this IBC plate mounted kit includes suction and delivery hose, with swivel dispensing spout with on/off valve to close off the hose to prevent dripping and it is ready to be installed straight away. This kit can be fitted to top or lower IBC bars, which makes it ideal for applications when the IBC is on a bund and fitting the hand diesel transfer pump to the top bar would be too high up to operate. 

This high quality diesel transfer pump from FMT Swiss AG is manufactured from shock resistant Die-cast aluminium with extremely small tolerances. The small tolerances of this pump allow for great suction & pressure performance.

Fitted with an on/off swtich, integral bypass & siphon protection, this 230v transfer pump is designed for a long service life and is capable of a 5 metre suction. The pump head is also rotatable 90 degrees in any direction, which gives the pump flexibility to be used in a wide range of applications.

This transfer pump from FMT has an encapsulated electric motor, which in case of extreme temperature fluctuations, largely prevents the formation of condensed water and of short-circuits resulting thereof.

Specification - 

Encapsulation of the electric motor, 

1.8 metre cable

1" BSP Inlet / Outlet

Self Priming Vane Pump

60 Litres per minute maximum flow rate

Up to 1.8 bar discharge pressure

5 Metre maximum suction height

Suitable for Fuel oils & Diesel

230v 50hz

Thermal Protection

IP66 Safety rating

FKM/NBR Seals

3 year warranty