Plastic Chemical Transfer Hand Pump

The K24 AdBlue™ pulse meter accurately measures the quantity of urea dispensed in an AdBlue pump installation.

These AdBlue - known as DEF in the US - digital turbine pulse meters are used to interface flow data with external systems, and therefore have no display to read off.

Flow rate: 6-100ltr Per Min

Fluid viscosity: 2-5.35 cSt

Pulses: 88 Per Ltr

Accuracy +/-1% after calibration

1" M BSP Inlet/Outlet c/w socket

The Brass Hose Swivel is specifically designed for connection to Piusi parallel fitting hose tails and nozzles. These brass swivels can also be used inside dispensing systems, where a swivel joint is required to connect rigid or flexible pipe work.

There is another range of these hose swivels, which are made from plated brass, and have a seal ring inside that suits tapered fittings.

The Stainless Steel Fuel Tank Filler Cap is designed to cap off the fill point on a storage tank, tanker faucet or valve. This robust solution prevents unwanted debris and water from entering into the tank fill point, as well as preventing dripping. This stainless steel fuel tank filler cap comes with lugs either side of the cap to enable easy application and removal.

Please note: This tank fill point cap is supplied as standard with leather seals, making it ideal as a diesel or oil tank cap. PTFE seals are available on request for use with aggressive fluids such as on chemical tanks.

The Piusi AODD AdBlue™ Pump has been designed to use a thermoplastic diaphragm to transfer water and chemicals such as AdBlue (or DEF), antifreeze and screenwash. As this Piusi pump uses air in order to transfer the fluid, no mains connection is required. These AdBlue™ transfer pumps are often used in garages and workshops where air lines are already set up. The port size and flow rate for each model varies and ranges from 50 l/min to 220l/min for bigger installations.

The Piusi AdBlue Pumps are able to be used in Zone 2 potentially flammable environments.