Piusi Self Service MC Dispensing AdBlue Management System

The CTS single channel fuel tank alarm system provides the user with the choice of setting the alarm to alert of either a high level, low level or bund leak depending upon their requirements. This level and bund alarm is a simple and cost effective solution when the user only requires to be alerted of one scenario, therefore making the multi-zone tank level alarm over-specified.

Available in either mains or battery power, the single channel fuel tank alarm has a clear, descriptive seven segment LED display that informs the user of the activated tank state. Both versions feature a test button that will activate the 90dB sounder and flash the display showing the current configuration of the tank level alarm, and a mute button to silence the sounder. The battery powered version has a low battery warning to give notice that the battery needs changing.

The mains powered version has the additional feature of a volt-free relay for connecting the fuel storage tank alarm to another piece of equipment on-site such as a building management system, or another mains powered single channel alarm allowing the alarm status to monitored remotely for example in the office. Whilst commonly used as a diesel tank alarm, it is also suitable for use with a range of fluids such as water, waste oil and chemicals

The Aluminium Fuel Tank Vent Cowl with Flameproof Screen is designed to fit over the male thread on the top of an above group storage tank or breather riser on an underground tank. The integrated flameproof screen makes it suitable for use on storage tanks containing flammable liquids. These vent cowls have a dual female thread that fit both a 1 1/2” or a 2” male thread.

The Pedrollo CK 50 is a high quality liquid ring pump manufactured in Italy. The CK series are suitable for use with Diesel, Clean water that doesn't contain any particles or with any liquids that aren't aggressive towards the materials the pump is made from.

Due to the specific principle of their operating performance, the Pedrollo CK 50 is an excellent solution in every case where a compact, self priming pump is required or where the fluid flow is irregular or contains air. 400v & model with bypass available on request.

Pump Body - Cast iron complete with threaded ports in compliance with ISO 228/1

Motor Bracket - Aluminium with brass insert (patented), reduces the risk of impeller seizure

Impeller - Brass star type with open radial vanes

Motor Shaft - Stainless steel EN 10088-3 - 1.4104

Mechanical Seal - Ceramic (stationary ring), Graphite (rotational ring) & Viton

Inlet / Outlet - 3/4" F BSP

The SAMOA Directflo DF100 is a very compact and reliable diaphragm pumps for medium volume transfer, dosing, spraying and dispensing a variety of fluids. The pump body is manufactured from rugged aluminium and has an aluminium air motor.

This pump is suitable for transferring Antifreeze, Windscreen wash, Diesel, lubricants & waste oils and can be used as a stand alone pump, or in systems that include hose reels.

551 010 - Hytrel® Diaphragms, Acetal Balls & Viton Seals. Suitable for Antifreeze and windshield wash solutions.

551 030 - Buna-N Diaphragms & Balls. Suitable for Antifreeze solutions, Diesel, lubricants, waste oil evacuation and transfer.