Piusi Self Service MC Dispensing Fuel Management System

The Submersible AdBlue™ Pump has been designed to be installed in large AdBlue™ tank installations where increased head pressure is required. This is a popular AdBlue™ transfer pump solution for tank manufacturers, as being submerged into the fluid means the storage tank cabinet does not need to make room for a pump to be fitted. 

These electric AdBlue™ pumps are built from anti-corrosive materials with a three stage impeller, wear resistant shaft and an anti-debris stainless steel strainer. The seals within this AdBlue™ pump - known as a DEF pump in the US - have been designed to keep the urea pure and the electrical cable gland seal has been reinforced. The pump’s motor has excellent cooling properties and can be used even when the top of the motor becomes partially exposed.

The MT Profil Fuel Tank Float Gauge from Afriso is a small mechanical clock gauge for measuring the tank's contents by a float that sits on the fuel and goes up and down with the level. Whilst also popular for diesel storage tanks, it is most commonly used as a domestic heating oil tank gauge. The small display shows a scale of Empty 1⁄4, 1⁄2, 3⁄4 and Full for factory calibrated versions, allowing the user to quickly identify the approximate fuel tank level.

This oil tank level gauge is available in different versions depending upon the specific height of the fuel tank, or there is an 8'0 adjustable version. The 8'0 adjustable version of the MT Profil oil tank float gauge displays the level reading in cm, and has a reversible display which goes to 150cm max on one side, and 250cm max on the other.

These oil tank gauges are supplied as standard with 1 1⁄2” BSP Male for easy fitting on the top of the storage tank or drum. If your tank has a 2" BSP hole, you can fit this gauge by purchasing a 2" x 1 1/2" reducing bush. If your tank has a vent hole, you can connect the gauge by fitting a 2" barrel nipple into the hole and adding a combi vent cap which has a 1 1/2" BSP thread to screw in the gauge to prevent an additional hole being drilled.

This stainless steel elbow fitting is available in sizes ranging from 1/2" - 4" F x F. Smaller sizes available on request.

ISO 228-1 BSPP Female. CF8M 316 Stainless Steel.

The Piusi Self Service diesel transfer pump is a forecourt-like fuel dispenser, but designed for the private diesel refuelling market where weights and measures are not required. This Piusi diesel pump has a standard mechanical flow meter detailing simple dispensing quantities, and its sturdy red steel floor standing case also incorporates a nozzle and hose support. The nozzle holster controls the on function of the pump with a manual lever, and automatically turns off the pump when the nozzle is returned. Thanks to its high flow rate capacity, this electric fuel transfer pump is often preferred when refuelling large fleet vehicles or heavy plant equipment and machinery.

There are numerous versions of this fuel dispenser available, including differing flow rates and the option of water filtration, which most vehicle manufacturers recommend when refuelling. There is also a mini version of the Self Service diesel transfer pumps available, ideal for direct mounting onto a bunded fuel tank, perhaps in applications where space is an issue.