Piusi Premium Manual IBC Diesel Pump Kit

The Cleanfill 2" Overfill Prevention Valve from Lafon can be fitted to a tank as a piece of safety and environmental protection equipment. This overfill protection device can be used on fuel and diesel storage tanks that are filled by gravity flow or a pressure pump system. When the tank is full, the valve will close preventing any further fluid from being dispensed into the tank. There is also a version available to be used on AdBlue™ storage tanks, a fluid which is known as DEF in America and other countries.

The Normond C Series Hydrostatic Fuel Tank Gauge, along with all Normond gauges, is a popular fuel tank level indicator for commercial sites. This is because due to featuring a hand pump mechanism, these fuel tank level gauges require no power, making them ideal for hazardous environments.

The C Series Normand Gauges give a level reading in volume, weight or height and are suitable for tanks up to 3 metres high using the standard capillary balance chamber provided. However, they can work with tanks up to 9 metres high if used with the optional alternative balance chambers. This fuel tank contents gauge must be individually calibrated to the size of your tank.

Please note, that upon order of this gauge you will be emailed a questionnaire, you will need to fill this in and send it to sales@northerntankstore.co.uk. As calibrated fuel tank gauges are made to order, there may be a lead time of 5-10 working days.

This Cim-Tek Fuel Filter is specifically designed for fitting to fuel bowsers with high flow pump systems. The Cim-Tek 70345 particles only fuel filter is designed for installations where space is an issue thanks to its shorter length design. This fuel tank filter is intended as a spin-on cartridge, meaning it can be easily replaced once it is full.  

The Cim-Tek Particle Bowser Fuel Filter is supplied as the element only, with a compatible head available as an accessory, as bowser manufacturers often develop a custom head.

The AdBlue™ Gravity Hose Kit is an all emcompassing solution for the dispensing of AdBlue™ from a bottom outlet, gravity fed installation.

Gravity hose kits are a cost effective solution for dispensing AdBlue™ (otherwise known as DEF) from an IBC rather than installing an AdBlue pump system. This is a popular solution for, but not limited to, the agricultural market.

This model of AdBlue™ gravity hose kit is made up of a choice of clear spiral of black EPDM AdBlue delivery hose with hose clips supplied, the Suzzara Blue manual nozzle and a 60 x 6 IBC bottom adaptor.

It's available in either 3m or 4m kits, to cater for how high off the ground the IBC in question is. You should not order a kit much longer than what is necessary for the height of the system, as any additional hose beyond this point may reduce the flow rate you could be achieving.