Piusi Suzzara Portable AdBlue Transfer Pump Kit (12v)

The K33 ATEX is a mechanical flow meter suitable for the monitoring of diesel, gasoline and kerosene. For non-commercial use, the K33 ATEX meets the ATEX requirements for precise measurement of the quantity of Gasoline, kerosene and diesel dispensed in environments with a high risk of explosion.

The ATEX mechanical flow meter has a 3-digit partial indicator, and a 6 digit totaliser.

PRECISION AND QUALITY

The K33 ATEX mechanical flow meter for gasoline, kerosene and diesel has been designed to ensure precise measurement of the amount of fuel dispensed. Easy to calibrate and install, the K33 ATEX flow meter can monitor the quantity of fuel dispensed for a maximum flow rate of 20-120 l/min and with a maximum working pressure of the pump of 3.5 bar. In addition, it can guarantee a burst pressure of 28 bar with a metering accuracy of +/- 1%.

RELIABILITY

The K33 ATEX mechanical flow meter for gasoline, kerosene and diesel is suitable for application to pumps or gasoline dispensers and is suitable for those who are looking for a simple and economic product, without particular need for control over the fleet of vehicles. The K33 ATEX can be installed in any position on both rigid and flexible pipes, as well as directly on pumps or tanks. It can also be used by gravity, thanks to its low resistance to flow.

The K33 ATEX as an ATEX flow meter is included in group II, category 2 G IIB T=85°C (T6), and therefore it is suitable for working in areas classified as "1" and "2" according to directive 99/92/EC.

The Piusi Viscomat Flowmat oil transfer pump with pressure switch combines the typical characteristics of gear pumps with the convenience of an automatic switch-off at the end of delivery. This allows the user to activate the fuel transfer pump without worrying about the need to switch the motor on and off. The performance of this Piusi pump guarantees good flow rates with high pressures, no pulsing, regular flow and silent operation. These oil transfer pumps can be used for both feeding single delivery points (with or without reels), and on fixed distribution systems.

The Plastic PRV Tank Vent Valve is a poppet type valve designed to stop fuel vapours from escaping under usual operating conditions. This plastic constructed pressure vacuum vent valve is used on static and mobile fuel storage tanks, and comes with a sealing ‘o’ring and metal stem.

This Piusi 24v and 12v Pump is designed for the portable dispensing of AdBlue (DEF) from a drum. Thanks to its 2m cable and clips for connection to the vehicle’s battery, this AdBlue drum pump is ideal for mobile applications where a drum needs to be moved to different dispensing locations or where mains power isn't available.

Complete with delivery hose, manual nozzle, suction downtube with strainer and 2” drum connector, this ready to use AdBlue transfer pump kit can be easily disconnected and moved between drums.