Piusi Meters

The K24 AdBlue™ pulse meter accurately measures the quantity of urea dispensed in an AdBlue pump installation.

These AdBlue - known as DEF in the US - digital turbine pulse meters are used to interface flow data with external systems, and therefore have no display to read off.

Flow rate: 6-100ltr Per Min

Fluid viscosity: 2-5.35 cSt

Pulses: 88 Per Ltr

Accuracy +/-1% after calibration

1" M BSP Inlet/Outlet c/w socket

The K24 Flow Meter is a digital flow meter with a turbine suitable for AdBlue monitoring and the digital management of the fluid being dispensed.

PRECISION AND QUALITY

The K24 digital AdBlue flow meter has been designed to monitor the flow of AdBlue. Easy to install, in-line or at the end of the dispensing pipe, The K24 has a display that can be applied in various positions to facilitate easy reading. The sturdy housing and sealed internal electronic board make it suitable for use in virtually all working conditions.

RELIABILITY

The K24 Digital Flow Meter has a plastic body with a polypropylene turbine. The pulse type is single-channel, reed switch. The electronic board with an LCD display shows a partial reading of 5 digits from 0.1 to 99999, for a total of 6 digits 1 to 999999 Total, resettable. The display also shows the supported flow rate, up to a maximum of 120 litres per minute.

The K24 AdBlue flow meter guarantees a metering accuracy of +/- 1%; if the metering turns out inaccurate, the K24 can always be calibrated to ensure maximum precision in its operation. With a pressure drop of < 0.03 bar at 120 l/min and a repeatability of 0.2 %, the K24 flow meter is powered by two AAA batteries. Thanks to its rotating display, the K24 can be adapted to any application and working condition.

The K600/3 is an electronic gear flow meter used for controling of the dispensing of fuels and anti-freeze liquid for non-commercial use. The K600/3 as an electronic flow meter shows on the display a partial total of 5 digits (h=11.5 mm) with floating point from 0.001 to 999.99 Total, not resettable to 8 digits (h=5 mm) from 1 to 99999999.

MADE IN PIUSI RELIABILITY

The K600/3 flow meter features acetal resin oval gears for monitoring the dispensing of diesel and other special fluids compatible with the construction materials. Equipped with an aluminium measuring chamber body, it consists of an integrated suction filter to ensure safe dispensing without impurities, which otherwise could cause unpleasant blocks while dispensing.

HIGH PRECISION

The K600/3 flow meter for diesel and anti-freeze liquid ensures a monitoring accuracy of +/- 0.5% for a maximum flow rate of 100 l/min.

These features complete the K600/3 flow meter:

Repeatability 0.2%

Pressure drop < 0.5 bar at the maximum flow rate.

The K24 ATEX/IECEx is the new flow meter for measuring the dispensed quantity of Gasoline, kerosene and diesel for non-commercial use.

ATEX/IECEx QUALITY

The digital flow meter for Gasoline, kerosene and diesel meets the ATEX/IECEx requirementsf or the use of materials in potentially explosive atmospheres. The K24 ATEX/IECEx has a sturdy aluminum body and a sealed electronic board, making it suitable for use in all working conditions.

Easy to install, in line or at the end of the dispensing pipe, it has a display that can be applied in various positions to facilitate reading. It is the ideal tool for managing the fluid dispensed.

The K33 ATEX is a mechanical flow meter suitable for the monitoring of diesel, gasoline and kerosene. For non-commercial use, the K33 ATEX meets the ATEX requirements for precise measurement of the quantity of Gasoline, kerosene and diesel dispensed in environments with a high risk of explosion.

The ATEX mechanical flow meter has a 3-digit partial indicator, and a 6 digit totaliser.

PRECISION AND QUALITY

The K33 ATEX mechanical flow meter for gasoline, kerosene and diesel has been designed to ensure precise measurement of the amount of fuel dispensed. Easy to calibrate and install, the K33 ATEX flow meter can monitor the quantity of fuel dispensed for a maximum flow rate of 20-120 l/min and with a maximum working pressure of the pump of 3.5 bar. In addition, it can guarantee a burst pressure of 28 bar with a metering accuracy of +/- 1%.

RELIABILITY

The K33 ATEX mechanical flow meter for gasoline, kerosene and diesel is suitable for application to pumps or gasoline dispensers and is suitable for those who are looking for a simple and economic product, without particular need for control over the fleet of vehicles. The K33 ATEX can be installed in any position on both rigid and flexible pipes, as well as directly on pumps or tanks. It can also be used by gravity, thanks to its low resistance to flow.

The K33 ATEX as an ATEX flow meter is included in group II, category 2 G IIB T=85°C (T6), and therefore it is suitable for working in areas classified as "1" and "2" according to directive 99/92/EC.

The Piusi K600/3 Fuel Pulse Meter is designed to count the delivery of diesel, lubrication oil, raps oil and anti-freeze at a maximum flow rate of 100lpm. These Piusi diesel pulse meters do not provide a reading, as they are generally used with an external system or display, when the amount of fuel used needs to be accessed elsewhere. The K600/3 fuel flow meter with pulse output is a versatile meter making it a solution for many applications.

Flow rate 10 - 100 l/min (Diesel), 6 - 60 l/min (Oil)

Fluid viscosity 2 - 5.35 (Diesel) – 10 - 2000 (Oil)

Pulses per litre 35 (Diesel) – 33 (Oil)

1” F BSP Flanged Inlet/Outlet (Diesel) – 3/4" (Oil)Oval gear system

Accuracy +/-0.5% after calibration

Inlet filter

The Piusi K24 Fuel Flow Meter is a digital turbine meter designed for the accurate counting of the quantity of diesel or water dispensed. Designed for flexible installation, this fuel counter meter can be added inline or by the nozzle end for easy reading of the compact yet clear digital display. This diesel fuel flow meter also has a face that can be rotated four way for ease of installation. Watch this video to see how to change the flow direction to meet your requirements. 

This diesel flow meter is of lightweight plastic construction, which makes it perfect for portable diesel transfer applications such as in the agricultural and plant markets where the dispensing system needs to be carried around. Thanks to its low minimum flow rate, the K24 flow meter is suitable for gravity as well as pump installations.

The K33 is a mechanical flow meters suitable for the monitoring of diesel, It has a partial indicator with 3 digits (max. 999 Litres), with a total of 6 digits.

PRECISION AND QUALITY

The K33 mechanical diesel flow meter have been designed for precise measurement of the quantity of fuels dispensed for non-commercial use. Easy to calibrate and install, the K33 flow meter can monitor the quantity dispensed for a maximum flow rate of 20-120 l/min and with a maximum working pressure of the pump of 10 bar. In addition, it can guarantee a burst pressure of 30 bar with a metering accuracy of +/- 1%.

RELIABILITY

The K33 mechanical flow meter for diesel is easy to calibrate at the place of installation and is suitable for installation on pumps or service stations for diesel, for those who want to keep the amount of dispensed fluid monitored without special needs for storage.

It is reliable and an economic mechanical flow meter that can also be used by gravity, thanks to the low resistance to flow.

The K44 is a mechanical flow meters suitable for the monitoring of diesel, It has a partial indicator with 4 digits (max. 9999 Litres), with a total of 7 digits.

PRECISION AND QUALITY

The K44 mechanical diesel flow meter have been designed for precise measurement of the quantity of fuels dispensed for non-commercial use. Easy to calibrate and install, the K44 flow meter can monitor the quantity dispensed for a maximum flow rate of 20-120 l/min and with a maximum working pressure of the pump of 10 bar. In addition, it can guarantee a burst pressure of 30 bar with a metering accuracy of +/- 1%.

RELIABILITY

The K44 mechanical flow meter for diesel is easy to calibrate at the place of installation and is suitable for installation on pumps or service stations for diesel, for those who want to keep the amount of dispensed fluid monitored without special needs for storage.

It is reliable and an economic mechanical flow meter that can also be used by gravity, thanks to the low resistance to flow.