Piusi K33 Biodiesel Mechanical Flow Meter

The Cleanfill 2" Overfill Prevention Valve from Lafon can be fitted to a tank as a piece of safety and environmental protection equipment. This overfill protection device can be used on fuel and diesel storage tanks that are filled by gravity flow or a pressure pump system. When the tank is full, the valve will close preventing any further fluid from being dispensed into the tank. There is also a version available to be used on AdBlue™ storage tanks, a fluid which is known as DEF in America and other countries.

The Mikalor Supra W2 Hose Clamps are heavy duty hose clips for the most demanding of hose assemblies. They benefit from a swivelling bridge which allows the clamp to be mounted in awkward applications without having to remove the hose.

Mikalor clips can also be opened and fastened in place without dislodging other parts, and have bevelled edges to protect the hose from damage. These hose clips are popular for industrial, automotive and agricultural machinery hoses.

The Husky Safe-T-Break® couplings are designed to disconnect the hose from the pumping system, in scenarios where a vehicle drives off with a nozzle still connected to the fill point. These Safe-T-Breaks® stop the installation having the whole pump system ripped out, therefore preventing both damage and spillages of fuel.

This Husky breakaway coupling is not re-usable and should therefore be disposed of after the initial break – a cost effective way of ensuring damage to the system is prevented. 

The standard models of these Safe-T-Break® couplings are designed for use with diesel, with a 3/4" ATEX approved version available for petrol. 

This Cim-Tek Filter Element is a replacement, 30 micron element for the Cim-Tek Hydrosorb fuel storage tank filter. This fuel tank filter element can be easily replaced to remove water and debris out of fuel continually.

This element is suitable suitable for the 70066 Cim-Tek Filter.