Piusi IBC Mounted Oil Pump Kit

This Oil Spill Kit contains all you need to simply and quickly deal with an oil spill in a portable and easy to access clip close carrier. Designed to absorb all hydrocarbon based oils, fuels, lubricants and petroleum based liquids, this emergency spill kit is a must have for wherever fuel or oil is stored, delivered or handled. Versions are available to clean up 10litres, 20litres and 40litres depending upon the individual requirements.

This Oil Spill Kit includes oil spill socks for containing the spill and stopping it spreading. These booms have a very flexible outer skin to ensure each have a high fluid absorbency of 7.5litres and high spill retention by moulding to the surface they are laid on. It also includes oil spill pads for absorbing the remaining fluid, each with a capacity of 1.1litres.

Due to their hydrophobic nature, the spill absorbents do not soak up water making them ideal for applications where water and oils must be separated. The spill pads remain buoyant in water, even when fully saturated, allowing them to absorb oil off the top.

The Piusi CF60 Fuel Tank Filter can be fitted to both the suction and delivery systems to ensure that clean, particle free fuel is dispensed. This oil and diesel filter has a spin on cartridge for easy installation and replacement. When a flow rate reduction is observed, these fuel storage tank filters for diesel and oil should be replaced to ensure that the filtration of the fuel is maintained. Available in the accessories table is the Piusi CF60 filter element only for replacing the existing one when full. 

Manufactured in the UK from Mild Steel Plate, this Steel Bunded Heating Oil Tank is suitable for the storage of most fuels and light oils.

Included with this Bunded Oil Tank is -

Bund Gauge

Tank Contents Gauge

2" BSP Fill Point with Cap

2" BSP Tank Vent with Cap

1" BSP Base feed with Isolation Valve

Top Lift points (Lift empty only)

1" BSP Spare socket into bund

10 Year Guarantee

This self bunding, steel oil storage tank is manufactured to comply with all current regulations.
Suitable for above ground instillations at Domestic, Commercial, Agricultural and industrial locations for storage of Paraffin, Kerosene, diesel oils and light lubricant oils.

Both the inner and outer tanks are constructed from mild steel plate to BS EN 10025.The inner tank providing the required storage area, the outer tank forms the required bund, with capacity of 110% of the total liquid being stored.

The tank vent is piped into the bund then to atmosphere further reducing the risk of spills in the event of overfilling the tank. Tanks are fitted with steel base supports to eliminate ground contact with the tank base. The tanks can also be fitted with steel legs to raise of the floor for gravity feed applications

Compliancy: BS799 part 5, Control of pollution (oil storage) (England) Regulations 2001, PPG2, PPG26.