Piusi Grease Delivery Hose

The Fill-Rite Series 900 mechanical fuel flow meter is a reliable solution for measuring how much diesel, petrol, kerosene and biodiesel up to B30 has been dispensed. It operates via a nutating disk system and clearly displays quantities up to 9999 litres on the fuel counter face. The face on this easy to install and calibrate diesel fuel flow meter is also able to be rotated 90 degrees to increase the flexibility of the installation.

Approved to EX II 2G c T6, the Series 900 fuel counter meter is certified safe for the dispensing of flammable liquids and the transfer of fuel in potentially explosive environments. These petrol and diesel flow meters are also capable of performing accurately in gravity as well as pump systems, thanks to its low minimum flow rate.

The Piusi Premium Rotary Manual AdBlue™ Pump is specially designed for the transfer of AdBlue™ (DEF) from an IBC, where there is no access to power or where the quantity dispensed is not high enough to warrant a more expensive electric pump.

Thanks to its careful design and Italian construction, this Piusi pump has a higher specification compared to other AdBlue™ hand pumps on the market in several ways. Benefitting from a Stainless Steel outer casing as opposed to plastic, this Piusi AdBlue™ pump kit is more durable, giving it a longer life span. It also has a much smoother operation for the user thanks to its rolling hand grip and quality internals.

Designed specifically as an AdBlue™ IBC pump, this IBC plate mounted kit comes complete with suction and delivery hose, with swivel dispensing spout with on/off valve to close off the hose to prevent dripping. This kit is able to fitted to top or lower IBC bars, which makes it ideal for applications when the IBC is on a bund and fitting the AdBlue™ transfer pump to the top bar would be too high up to operate.

The Piusi K700 mechanical fuel flow meter uses an oval gear system to accurately measure the amount of diesel dispensed, even at higher flow rates, which is indicated on its large mechanical display. Thanks to its maximum flow rate of 220lpm, the K700 fuel counter meter is designed for higher flow applications where larger volumes of fuel may be required to be transferred. Manufactured in Italy by Piusi, this diesel flow meter is a durable solution that is easy to fit and calibrate, and comes complete with an inlet filter for removing large debris.

The diesel fuel flow meter’s body can also be rotated to allow the flow from four directions, which makes this Piusi flow meter a flexible solution for a range of installations.

This high quality diesel transfer pump from FMT Swiss AG is manufactured from shock resistant Die-cast aluminium with extremely small tolerances. The small tolerances of this pump allow for great suction & pressure performance.

Fitted with an on/off swtich, integral bypass & siphon protection, this 230v transfer pump is designed for a long service life and is capable of a 5 metre suction. The pump head is also rotatable 90 degrees in any direction, which gives the pump flexibility to be used in a wide range of applications.

This transfer pump from FMT has an encapsulated electric motor, which in case of extreme temperature fluctuations, largely prevents the formation of condensed water and of short-circuits resulting thereof.

Specification - 

Encapsulation of the electric motor, 

1.8 metre cable

1" BSP Inlet / Outlet

Self Priming Vane Pump

60 Litres per minute maximum flow rate

Up to 1.8 bar discharge pressure

5 Metre maximum suction height

Suitable for Fuel oils & Diesel

230v 50hz

Thermal Protection

IP66 Safety rating

FKM/NBR Seals

3 year warranty