Piusi Grease Control Nozzle

This Stainless Steel Solenoid Valve is a direct acting valve, meaning that no pressure has to be applied to operate, suitable for a range of fluids including AdBlue™, fuels, oil and water. As a normally closed solenoid valve, the liquid flow is shut off until the valve is activated. When the coil integral to the valve becomes energised by an electrical current, the valve opens to enable the flow of liquid through the pipeline.

This stainless steel solenoid valve is therefore designed for situations where the fluid only needs to be released at certain intervals, for example to feed a generator with fuel from the back up storage tank. The valve could also be wired into a pump to make sure that fluid only enters the pipework from the tank when the pump is activated.

Aluminium automatic nozzle designed for delivering diesel. It is light, robust and includes a trigger latching mechanism to ease fluid delivery at different flow rates and an aluminium swivel to 1" BSP F to allow an easy hose connection.

70 or 100 litre waste oil gravity collection units From SAMOA. Discharge is done through a 1:1 pressure ratio pneumatic piston pump attached to the back of the unit reservoir and 1.5m hose with hydraulic type coupler.

The Samoa EC30 Metered oil control valve is fitted with an integral flow meter. The large character display make it easy to read, and it's batch trip and totaliser functions make it perfect for dispensing lubricants and antifreeze in a garage environment.

The nozzle has a cam and piston valve design, allowing for great control over the fluid being dispensed. As well as being fitted with a safety latch which must be depressed before fluid can be dispensed, stopping accidental spillage.

The meter is powered by replaceable AAA batteries which are stored in a sealed compartment.