Piusi Fuel Management User Keys

The Brass Angle Check Valve is designed to make sure that the suction pipe connected to an above ground storage tank remains primed with a suitably rated spring. It also ensures that pressure from the head of fuel is held back from the pump. If the pumping system has a hose reel, then the available pressure relief valve should be installed. 

The Husky Nozzle Service Kit is a complete kit for the removal and installation of nozzles in a clean and simple way – for use with Husky nozzles and other styles of forecourt nozzle. The service kit comes with a stainless steel pail, nozzle holder – which keeps the fuel nozzle off the floor, breakaway drain cup and a fuel filter drain cup.

The kit provides a safe way of collecting fuel when the Husky nozzle, breakaway and filter are taken apart – allowing the remaining fuel from each part to be drained safely into the provided containers. Each of the drainage containers allow any brand and style of nozzle, breakaway or filter to be used with the kit. The pail also doubles up as a container for all the components, so that the kit can be easily transported.

The Adam Pumps PA2 80 Diesel Transfer Pump is a low cost, high quality Fuel pump manufactured in Italy. 

Adam Pumps 230v PA2 80 Specification -

230v 50hz Pump

On / Off Switch

IP55 Weather Protection

2 Metre Power Cable

1" BSPP Female Inlet / Outlet

Duty Cycle: Continuous Duty

100 L/min maximum flow rate

Max pressure: 2.5 bar

Integral Bypass valve

-20/+50 °C maximum operating temperature

Suitable for Diesel Only

1 Year warranty

SAMOA Reelmaster RM-34 heavy-duty hose reel for compressed air, low pressure water, antifreeze solutions, diesel and lubricants.

• Very tough construction able to stand regular use and abuse in Intensive Duty applications.
• Fatigue resistant steel spring for years of durable performance and even load when pulling and recoiling the hose.
• Full port shaft and swivel for no restrictions.
• Spool mounted on two permanent lubricated and sealed ball bearings to reduce torque load on spring for smooth retraction and longer life.
• Large effective radial latching area for easier operation.
• Hose guide arm can be placed in different positions to accommodate any method of mounting.
• Narrow footprint allows accommodating more reels on the same surface.
• Hose reels with hose include 0.8 m inlet hose

Hose length: 15 metres

Hose Internal Diameter: 3/4"

Connecting Hose Inlet: 3/4" BSP (M)

Delivery Hose Outlet: 3/4" BSP (M)

Pressure Rating: 125 bar

Weight: 38kg (with hose)