Piusi Fuel Management System Type C Manager Key

The K600/3 is an electronic gear flow meter used for controling of the dispensing of fuels and anti-freeze liquid for non-commercial use. The K600/3 as an electronic flow meter shows on the display a partial total of 5 digits (h=11.5 mm) with floating point from 0.001 to 999.99 Total, not resettable to 8 digits (h=5 mm) from 1 to 99999999.

MADE IN PIUSI RELIABILITY

The K600/3 flow meter features acetal resin oval gears for monitoring the dispensing of diesel and other special fluids compatible with the construction materials. Equipped with an aluminium measuring chamber body, it consists of an integrated suction filter to ensure safe dispensing without impurities, which otherwise could cause unpleasant blocks while dispensing.

HIGH PRECISION

The K600/3 flow meter for diesel and anti-freeze liquid ensures a monitoring accuracy of +/- 0.5% for a maximum flow rate of 100 l/min.

These features complete the K600/3 flow meter:

Repeatability 0.2%

Pressure drop < 0.5 bar at the maximum flow rate.

This Brass Solenoid Valve is a direct acting valve, meaning that no pressure needs to be applied to operate, for a range of fluids including fuels, oils and water. As a normally closed solenoid valve, until the valve is activated the fluid flow is shut off. When the electrical current that runs through the coil inside the valve is energised, the valve opens and allows the flow of liquid through the pipework.

This brass solenoid valve is therefore designed for applications where fluid only needs to be released on occasions, such as to feed a generator with diesel from the back up storage tank. It could also be wired into a pump ensuring that fuel only enters the pipework from the tank when the pump is turned on.

The Piusi A80 diesel nozzle is automatic fuel nozzle designed for private, non-resale refuelling of vehicles. As an automatic fuel pump nozzle, it will shut off when the tank is full, preventing an overfill scenario and allowing the safe use of the integrated 3 positions stay open latch. The Piusi standard automatic diesel nozzle is strong and reliable with a higher flow rate compared to A60 nozzle, making it a perfect solution for refuelling larger vehicles such as lorries, agriculture and plant machinery.

The Piusi Auto 80 refuelling nozzle is commonly used alongside high speed, powered diesel pump systems. The fuel nozzle is also available with a lower and higher flow rate (please see related products), depending upon the speed of the pumping system is for use with.

This automatic fuel nozzle is well known in the market as a reliable and comfortable to handle solution, without the added cost that comes with the forecourt style brands.

Not suitable for gravity fed operation.

This Cim-Tek Filter Element is a replacement, 30 micron element for the Cim-Tek Hydrosorb fuel storage tank filter. This fuel tank filter element can be easily replaced to remove water and debris out of fuel continually.

This element is suitable suitable for the 70066 Cim-Tek Filter.