Piusi EXGO ATEX Fuel Transfer Pump

The CTS single channel fuel tank alarm system provides the user with the choice of setting the alarm to alert of either a high level, low level or bund leak depending upon their requirements. This level and bund alarm is a simple and cost effective solution when the user only requires to be alerted of one scenario, therefore making the multi-zone tank level alarm over-specified.

Available in either mains or battery power, the single channel fuel tank alarm has a clear, descriptive seven segment LED display that informs the user of the activated tank state. Both versions feature a test button that will activate the 90dB sounder and flash the display showing the current configuration of the tank level alarm, and a mute button to silence the sounder. The battery powered version has a low battery warning to give notice that the battery needs changing.

The mains powered version has the additional feature of a volt-free relay for connecting the fuel storage tank alarm to another piece of equipment on-site such as a building management system, or another mains powered single channel alarm allowing the alarm status to monitored remotely for example in the office. Whilst commonly used as a diesel tank alarm, it is also suitable for use with a range of fluids such as water, waste oil and chemicals

The Cleanfill 2" Overfill Prevention Valve from Lafon can be fitted to a tank as a piece of safety and environmental protection equipment. This overfill protection device can be used on fuel and diesel storage tanks that are filled by gravity flow or a pressure pump system. When the tank is full, the valve will close preventing any further fluid from being dispensed into the tank. There is also a version available to be used on AdBlue™ storage tanks, a fluid which is known as DEF in America and other countries.

The Brass Lockable Lever Ball Valve is designed for a variety of applications and is available in a range of sizes. These lockable brass ball valves include a locking mechanism meaning that these are often required for security or safety. The lever ball valves can be locked using a padlock in either the open or closed position, and the locking device covers the stem nut, which makes the removal of the lever impossible without first removing the padlock.

The SAMOA Directflo DP200 is a very reliable diaphragm pump for high volume transfer, dosing, spraying and dispensing a variety of fluids. The pump body is manufactured from rugged aluminium and has an aluminium air motor.

This pump is suitable for transferring Antifreeze solutions, Diesel, lubricants & waste oils and can be used as a stand alone pump, or in systems that include hose reels.

555 010 - Hytrel® Diaphragms, Acetal Balls & Viton Seals. Suitable for Antifreeze solutions.

555 030 - Buna-N Diaphragms, Acetal Balls. Suitable for Diesel, lubricants, waste oil evacuation and transfer.