Piusi Clear Captor Water/Particle Filter Element

The Fill-Rite Series 900 mechanical fuel flow meter is a reliable solution for measuring how much diesel, petrol, kerosene and biodiesel up to B30 has been dispensed. It operates via a nutating disk system and clearly displays quantities up to 9999 litres on the fuel counter face. The face on this easy to install and calibrate diesel fuel flow meter is also able to be rotated 90 degrees to increase the flexibility of the installation.

Approved to EX II 2G c T6, the Series 900 fuel counter meter is certified safe for the dispensing of flammable liquids and the transfer of fuel in potentially explosive environments. These petrol and diesel flow meters are also capable of performing accurately in gravity as well as pump systems, thanks to its low minimum flow rate.

The CTS Fuel Tank Fill Point Cabinet is designed to securely lock away an oil or diesel storage tank's filling point from tampering and theft without making it difficult to view tank level readings. The unit comes complete with top entry 2” fuel tank fill point, level ball valve for isolation and filler cap to prevent dripping, as well as a removable drip tray with sight glass and easy grip handle, which can be opened even when the cabinet is locked to allow convenient emptying/cleaning at all times.

The benefit of the CTS diesel and oil fill point cabinet over alternatives on the market is its partial glass front. If an installed gauge is showing a low fuel level, anyone at the tank can identify that a fuel delivery is required even when the cabinet is closed. On other models with a full metal door this would go undetected until the cabinet was next opened, which could result in unexpectedly running out. As the glass front is only partial, the tank fillpoint is still secured out of sight and reach behind the lockable cabinet door. It is positioned so that if the glass is broken, no syphoning fitting can be attached. 

The diesel and oil fill point cabinet is designed to be installed onto the side of a steel storage tank, an external bund that the fuel tank sits on/inside or a wall in remote filling point scenarios. It is often used as a remote fill cabinet in oil heating installations where the tank is not easily accessed by the fuel delivery driver.

Please note: Alarms and gauges are to be purchased separately to allow for bespoke configurations. The fill point cabinet back plate has pre-threaded mounting holes for the simple installation of multiple alarms and gauges.

6 Metre long probe for use with OLE tank gauge alarm kits. Suitable for Diesel, AdBlue & B100. This probe can function as high level, or bund.

The O.L.E T5020 is a high accuracy electronic gauge for use with fuel tanks that are up to 10 metres high. Designed for use outdoors, the T5020 tank gauge features an IP65 rated enclosed, and an easy to read backlit display which indicates the contents of the fuel tank as a percentage, and in litres.

The T5020 provides a continuous reading of the contents inside the tank, and comes equipped with an alarm to also act as a leak/overfill alarm.

Thanks to the design, this electronic tank gauge can be used to give accurate readings of any shaped tank.

CT5020 tank gauges come as standard with 4-20mA outputs and Modbus RTU/RS485, so can be connected to BMS (Building Management Systems).

O.L.E T5020 Gauge Specifications -

Suitable for any shape tank

+/- 0.25% Accuracy

Suitable for use with Diesel, B100 Biodiesel, AdBlue & Antifreeze

Backlit electronic display

Gives continuous readout in litres (screen also shows a % bar)

Includes 4-20mA outputs

Modbus RTU/RS4485 Communications

Can connect to BMS System

Weatherproof to IP65

Power supply can be 230v, 110v or 24v DC