Piusi CFD 70-30 Water/Particle Filter Element

The SpillStop 2” Overfill Prevention Valve protects both the environment and the individual from the effects of fuel spillage. This overfill protection device is suitable for use on both fuel and diesel storage tanks, which may have a pumping or gravity feed system. Once the tank has reached its maximum fuel capacity, this valve will close to prevent any additional fuel from being delivered, thus preventing overfilling. A version of this can be supplied specifically for use on plastic tanks.

Flow Rate Range (Litres per minute) - 35-600

Pressure Range (Bar) - 0.15-6

Working Temperature - -20/+50ºc

Loxeal 11 Sealant Activator is a solvent based activating spray, for flanged or threaded joints, which cleans, degreases and speeds up the cure time. After applying the pipe sealant to the male end, spray the sealant activator on the female end and a cure time should be established between 20-120 seconds.

The Cim-Tek Filter Element is a replacement, 2 micron element for the Cim-Tek Hydroglass Bio fuel storage tank filter. This fuel tank filter element can be easily fitted as a spin on cartridge when you need a replacement.The 70lpm element is suitable for the 70232 Cim-Tek filter, whereas the 100lpm element is compatible with the 70037 Cim-Tek fuel filter.

Unlike the Cim-Tek Hydrosorb filters which use a paper element, the Cim-Tek Hydroglass alternatives make use of a high-performance fibre glass element for the more challenging nature of biodiesel. This Cim-Tek fuel tank filter also benefits from a higher dirt holding capacity which results in longer element life.

The Piusi EXGO! ATEX fuel pump is a 12v fuel transfer pump for flammable liquids. Designed to be OEM integrated into a fuel system in a zone one environment, these ATEX pumps are the ideal solution for small mobile tanks and refuelling small vehicles. This petrol transfer pump has a sturdy, cast iron body, and thanks to its quality manufacturing has a long life span. This 12 volt fuel transfer pump has an integrated bypass valve and thermal protected motor.

Due to regulations this unit is not supplied with battery connectors and is required to be connected into a 12v supply by a qualified electrician.