Piusi Air Operated Oil Drum Wall Mounted Pump Kit

The CTS Mains Operated Multi-Compartment Fuel Tank Alarm system has three functions; to detect and warn of a tank overfill, a high/low liquid level and a bund leak. If this fuel tank alarm identifies any of these issues, the zone in question will light up on the alarm’s screen, combined with an alarm sounder and flashing orange strobe, which provides the user with a clear warning of the activated tank state. Each zone can be configured in any of the three functions High, Low or Bund, enabling the complete customisation of these fuel tank alarms based upon the user's requirements with a very simple set of electrical jumpers.

Options are available complete with three relays, to allow external equipment to be connected to each zone of the tank level alarm such as building management system for remote monitoring. This level and bund alarm also has the additional feature of controlling the pump from the relays (if fitted). When the fuel storage tank contents are 'low', the pump switches on and stays on until 'high' is reached.

If you require a tank level alarm for something other than diesel or light oil, we also supply a water and chemical alarm probe, and a high viscosity oil tank level probe – which is also suitable for AdBlue as well as high viscosity oils.

The Oil Drum Level Probe is designed for use with any of the single zone CTS tank level alarms to indicate that the oil level within a drum has reached the specified high level. The primary application of this level switch is to prevent an overflow situation when filling a drum in a waste oil storage system.

This Stainless Steel Solenoid Valve is a direct acting valve, meaning that no pressure has to be applied to operate, suitable for a range of fluids including AdBlue™, fuels, oil and water. As a normally closed solenoid valve, the liquid flow is shut off until the valve is activated. When the coil integral to the valve becomes energised by an electrical current, the valve opens to enable the flow of liquid through the pipeline.

This stainless steel solenoid valve is therefore designed for situations where the fluid only needs to be released at certain intervals, for example to feed a generator with fuel from the back up storage tank. The valve could also be wired into a pump to make sure that fluid only enters the pipework from the tank when the pump is activated.

The Husky Eagle Aviation Fuel Nozzle is designed specifically for applications involving over the wing refuelling of aircraft. It is a heavy duty, high flow manual refuelling nozzle with handle guard and side protection. Supplied with both a duck bill jet fuel spout and a round aviation fuel spout, this Husky nozzle is suitable for AVGAS, AVJET A1, Aspen 2 and Aspen 4.

This refuelling nozzle benefits from easy operation, fingertip sensitivity, adjustable closing speed and an easy to service stainless steel fuel filter screen.