Piusi Air Operated Grease Transfer Pump Kit

The ATEX Approved Fuel Tank Alarm system is designed for alerting the user of a high fluid level or that there is fluid within the bund, which may indicate a leak or rain water ingress. ATEX certified to Zone 1, this tank level alarm is suitable for tanks containing flammable liquids, provided that the probe used is suitable.

This ATEX tank alarm is battery powered for use on portable installations or sites where mains power is inaccessible. The bund alarm benefits from a flashing red LED & 95db alarm which sounds to alert the user to a problem continuously for 120 seconds followed by a periodic beep for 60 minutes. This fuel tank level alarm has test battery, test alarm and alarm cancel functions for ease of use.

We offer a version that comes as standard with fuel tank probe for diesel, kerosene and JET A1 tanks, and a version without probe for other fluids such as petrol using a third party ATEX probe with solid stem.

The GoldenRod 470-5 Fuel Filter Element is the replacement, 10 micron paper cartridge for the GoldenRod 495 fuel tank filter. You should change your GoldenRod filter element when you notice the flow rate of your system dropping, as this indicates the fuel storage tank filter is getting full.

We would recommend using the GoldenRod filter wrench when changing the paper element to limit the risk of cracking of the bowl whilst trying to screw it with force, and ensure it is screwed back on tight enough to prevent leaks.

This Cim-Tek Water/Particle High Flow fuel tank filter is an industry recognised filter designed to remove water and debris up to 10 microns. Suitable only for high flow pumping installation, this Cim-Tek filter is constructed from resin-coated paper, which fits inside the easily replaceable when full, spin-on cartridge.

Cim-Tek fuel filters are an industry-leading brand made in America known for its high-quality and reliable fuel filters. The Cim-Tek 70098 fuel tank filter is designed for higher flow rate pump systems up to 120lpm.

This 2" Overfill Prevention Valve is designed to be used with above ground storage tanks to prevent overfilling. The valve physically closes the inlet to the tank when the fuel level inside reaches it's maximum during a fuel delivery. This prevents damage to the tank, and environment as well as the costs associated with cleaning spilt fuel.

The thread is 2" BSPP and can be screwed into a 2" BSPP Female Socket. Thanks to it's design, this valve only takes 59mm of tank space so doesn't effect tank capacity as much as other brands.