Piusi 60:1 Air Operated Grease Transfer Pump

The Fuel Tank Vent Cap is to be used on an above ground fuel storage tank’s 2” male thread to provide ventilation. These vent caps, which are designed to be fitted on to heating oil storage tanks, have a plastic mesh that prevents particles and debris from getting into the tank from this point. As these have no thread, either side of the oil tank vent cap has a screw that cuts into the male thread on the tank enabling it to be held into place.

The ZVA Automatic AdBlue™ Magnetic Nozzle is designed for use in conjunction with the ELAFIX 40 adaptor in order to prevent the costly miss-filling of AdBlue into the diesel tank. This magnetic spout ZVA nozzle will only allow fluid to pass once it has been magnetically opened by the ELAFIX AdBlue magnetic adaptor fitted within the vehicle filler neck. Therefore, by using this AdBlue nozzle you cannot physically dispense into the wrong tank, as the diesel fill point will not contain a magnet.

The miss-filling of AdBlue™ into the diesel tank is a common issue and will be costly for the vehicle owner to put right. AdBlue™ is not compatible with many materials and miss-filling can corrode the pipework and components of a fuel system – resulting in thousands of pounds of damage, as well as having to pay for the removal of AdBlue™ from the tank.

This automatic AdBlue™ nozzle is a well-known branded ZVA AdBlue™ dispensing option approved for use in heavy use, resale environments, such as those seen at the forecourt and service station. Due to these approvals it carries a higher price that than alternative AdBlue nozzle models.

This Cim-Tek Filter Element is a replacement, 30 micron element for the Cim-Tek Hydrosorb fuel storage tank filter. This fuel tank filter element can be easily replaced to remove water and debris out of fuel continually.

This element is suitable suitable for the 70067 Cim-Tek Filter.

The SAMOA Polaris Series Wall Mounted transfer Pump Kit is a wall or tank mountable metered diesel pump kit housed within a lockable cabinet. The unit includes a 230v - 50Hz diesel pump with 1.8 m cable and plug, cabinet with nozzle holder with automatic on/off switch, 4m delivery hose, automatic nozzle and a three digit meter flange mounted to the pump and with a 90° swivelling elbow outlet.

Inlet connection: 1" BSP (F) or flange coupling

Maximum suction lift: 2.5m

Pressure: 1.7 bar

230v - 50hz - 3 amp - 500 watt

Electric AC motor with IP55 protection, allow continuous operation duty.

On/off switch and fuse.