Pedrollo PLURIJET 90 Self Priming Multi-Stage Pump

The Plutone PO Diesel Fuel Suction Hose from IPL is manufactured from a special blend of PVC/NBR with strong harmonic steel wire and polyester yarn reinforcement, which makes the Plutone Suction Hose a sturdy and durable solution for fuel pump installations, though it can also be used as a fuel delivery hose or return line in hydraulic systems.

This suction hose is resistant to crushing, abrasion and weather, it also has great flexibility even at low temperatures.

We can offer Plutone suction hose in assemblies, per metre and in coils. Please contact us for more information.

Water settlement tanks are used to remove the silt contaminants from water being pumped from ground holes, allowing unwanted waste water to be discharged in accordance with environmental agency guidelines PPG1.

Inlet ports: 1 x 4” & 1 x 6” female bauer connector

Outlet: 2 x 6” male bauer connector

Drain points: 3 x 3"

Four point lifting (empty only).

Fork lift pockets

Manufactured in the UK from Mild Steel Plate, this Steel Bunded Heating Oil Tank is suitable for the storage of most fuels and light oils.

Included with this Bunded Oil Tank is -

Float Type Bund Gauge

Hydrostatic Tank Contents Gauge

2" BSP Fill Point with Cap

2" BSP Tank Vent with Cap

1" BSP Base feed with Isolation Valve

1" BSP Return Point

Top Lift points (Lift empty only)

1" BSP Spare socket into bund

Overfill Prevention Valve

10 Year Guarantee

Optional Extras -

Top Feed Outlet

Fill Point Cabinet

Electronic Tank Gauges

Selenoid Valves

Day Tank Controllers

Pump Kits

Low Level Fill Points

This self bunding, steel oil storage tank is manufactured to comply with all current regulations.
Suitable for above ground instillations at Domestic, Commercial, Agricultural and industrial locations for storage of Paraffin, Kerosene, diesel oils and light lubricant oils.

Both the inner and outer tanks are constructed from mild steel plate to BS EN 10025.The inner tank providing the required storage area, the outer tank forms the required bund, with capacity of 110% of the total liquid being stored.

The tank vent is piped into the bund then to atmosphere further reducing the risk of spills in the event of overfilling the tank. Tanks are fitted with steel base supports to eliminate ground contact with the tank base. The tanks can also be fitted with steel legs to raise of the floor for gravity feed applications

Compliancy: BS799 part 5, Control of pollution (oil storage) (England) Regulations 2001, PPG2, PPG26.