2" SpillStop Overfill Prevention Valve

The Piusi Shark (SQUALO35) AdBlue pump is the first submersible pump specifically designed  for dispensing AdBlue™ from an AdBlue™ tank, rather than for water transfer. Firstly, it's 35lpm flow rate is the proven speed in the market for refilling vehicles and off road machinery with AdBlue, due to the smaller tank size than diesel. Also, thanks to its integrated bypass valve, this submersible AdBlue pump can be used with a nozzle without the added cost of buying a pressure relief valve. 

Reduced overall dimensions guarantee easy installation of this compact electric AdBlue™ pump, ideal for when there isn't room for a pump in the tank cabinet. The low 30mm suction level of the Shark offers almost complete emptying of the tank, exceeding that of alternative submersible AdBlue Pump models, and has a strainer to remove any debris that may have entered and sank to the bottom of the tank to prevent it from entering the pump or the vehicle SCR system. Thanks to it being a regenerative turbine pump, it benefits from pressure building capabilities ten or more times that of a centrifugal pump with the same impeller diameter and speed.The Piusi Shark also has a built in pressure regulator that optimises flow rate to reduce unnecessary energy consumption, saving the user on energy costs.

A version of this Piusi pump is available with a 6 minute timer, to prevent the pump from dry running damage in the event of the user forgetting to turn it off when they have finished dispensing. 

The Piusi K700 mechanical fuel flow meter uses an oval gear system to accurately measure the amount of diesel dispensed, even at higher flow rates, which is indicated on its large mechanical display. Thanks to its maximum flow rate of 220lpm, the K700 fuel counter meter is designed for higher flow applications where larger volumes of fuel may be required to be transferred. Manufactured in Italy by Piusi, this diesel flow meter is a durable solution that is easy to fit and calibrate, and comes complete with an inlet filter for removing large debris.

The diesel fuel flow meter’s body can also be rotated to allow the flow from four directions, which makes this Piusi flow meter a flexible solution for a range of installations.

The Aquafighter Snake is a fuel tank water absorber designed to remove both free and suspended/emulsified water from fuel tanks of industrial machines, boats, and fuel storage tanks with small openings such as generator belly tanks.

The increase of bio content in fuel means that there is a rising issue associated with water contamination and microbial growth, which is responsible for a nasty sludge that blocks filters, damages equipment, corrodes engines and causes poor fuel efficiency. The Aquafighter water absorber eliminates these problems by reducing the water content levels down to 75ppm to meet the EN590 diesel fuel standards (200ppm), saving you costly damage and downtime. The diesel tank water absorber not only absorbs free water like other solutions on the market but also separates and captures the suspended and emulsified water in the fuel, which often gets left to cause serious damage to your vehicles and equipment. 

By working in this way, the Aquafighter Snake fuel tank water absorber provides numerous benefits including preventing diesel bug from forming, reducing filter replacement and need for tank cleaning and protecting the tank from corrosion. 

Please note: If this is your first time using Aquafighter, we recommend buying 2 units. The first can be added to absorb the current water, which may become full quickly if there is a large problem with water. The second to be added once the other has been removed to act as a prevention against future water content.

The Pedrollo PLURIJET 90 is a self priming, multi-stage pump manufactured in Italy. The PLURIJET series are suitable for use with Clean water that doesn't contain any particles or with any liquids that aren't aggressive towards the materials the pump is made from.

Due to their silence, reliability & low power consumption, the PLURIJET 90 is recommended for domestic & civil applications, in particular for pressurising and distributing water in combination with pressure tanks.

Pump Body - Stainless steel AISI 304 complete with threaded ports in compliance with ISO 228/1

Body Backplate - Stainless steel AISI 304

Impellers - Stainless steel AISI 304

Diffusers - Stainless steel AISI 304

Motor Shaft - Stainless steel AISI 431

Mechanical Seal - Graphite (stationary ring), Ceramic (rotational ring) & NBR

Inlet - 1-1/4 " F BSP

Outlet - 1" F BSP