Camlock Male Adaptor with Male Thread

The Clear Diesel Suction Hose is a flexible, general suction hose with steel wire braid and a transparent wall. This enables visual indication of the fluid which gives you an idea of flow at a glance. Whilst this diesel hose is primarily designed for suction applications, it can also be used as a fuel delivery hose. The ¾” version of these fuel suction hoses can be used in AdBlue™ pump installations and in AdBlue™ gravity hose kits.

The CTS single channel fuel tank alarm system provides the user with the choice of setting the alarm to alert of either a high level, low level or bund leak depending upon their requirements. This level and bund alarm is a simple and cost effective solution when the user only requires to be alerted of one scenario, therefore making the multi-zone tank level alarm over-specified.

Available in either mains or battery power, the single channel fuel tank alarm has a clear, descriptive seven segment LED display that informs the user of the activated tank state. Both versions feature a test button that will activate the 90dB sounder and flash the display showing the current configuration of the tank level alarm, and a mute button to silence the sounder. The battery powered version has a low battery warning to give notice that the battery needs changing.

The mains powered version has the additional feature of a volt-free relay for connecting the fuel storage tank alarm to another piece of equipment on-site such as a building management system, or another mains powered single channel alarm allowing the alarm status to monitored remotely for example in the office. Whilst commonly used as a diesel tank alarm, it is also suitable for use with a range of fluids such as water, waste oil and chemicals

The Heating Oil Bowl Filter is a 40 micron, alloy constructed inline filter. This heating oil tank filter is available in a number of different thread sizes depending upon the application. 

SAMOA Solura Blue 12v DC multi-diaphragm pump with no mechanical seals designed for dispensing AdBlue®/DEF and other water-based non corrosive products. Pump is self-priming and has a by-pass valve. Electric motors have IP55 protection and include on/off switch, fuse and 2m cable and crocodile clips.

Electric motor power: 260w

Inlet/outlet connection: 1" BSP (M)

Maximum suction lift: 1.8m

Maximum delivery pressure: 1.6 bar

Maximum delivery: up to 32 l/min