Camlock Male Adaptor with Female Thread

This Piusi AdBlue™ Suction Hose is a quality solution designed for use with all electric AdBlue™ (or DEF as it is otherwise known) pump kits and installations. This particular suction hose is supplied as standard on all Suzzara Blue electric AdBlue pump kits in a 1.5m length, and is often specified on AdBlue™ storage tanks. This Piusi AdBlue™ hose can be supplied either open ended or in a coil depending upon customer requirements.

The Filstop 2" Overfill Prevention Valve is designed to act as the fill point for both metal and plastic tanks. The valve physically closes the inlet to the tank when the fuel level inside reaches it's maximum during a fuel delivery. This prevents damage to the tank, and environment as well as the costs associated with cleaning spilt fuel.

The steel tank version screws straight into the 2" BSP Inlet, whereas the plastic version requires a hole to be cut into the top of the tank for fixing via locknut.

Maximum Flow Rate – 580lpm

Minimum Flow Rate – 50lpm

Leak Rate when closed – 2.5lpm

Max Working Pressure – 7 Bar (Tested to 8 bar)

Max Spike Pressure – 12 Bar

Min Working Pressure – 0.15 bar

Tank Fitting – 2″ BSP Parallel Male Thread

Part of the ALPHA family of fuel dispenders, the ALPHA Petrol pump is a forecourt sytyle petrol dispenser designed for refilling fleets of vehicles.

The unit can easiliy be connected to an externam fuel management system, or be supplied with the comprehensive FC10 management system. Please contact us for a quote.

ALPHA Petrol specification -

1450mm H x 550mm W x 490mm D

4 Piston meter (+/- 0.25% accuracy)

Belt driven ATEX petrol pump

Stainless steel cabinet with seperate top housing for display

LCD Display with back light. Shows up to 99,999.9 litres, totaliser shows up to 99,999,999 litres

10:1 or 100:1 Pulser output for simple connection to fuel management systems

3.66m Steel braided fuel hose (12ft) (Nozzle not included)

The SAMOA Digital Preset Oil Nozzle is designed to make dispensing oil more accurate through use of it's automatically closing valve. The meter can be pre-set with up to 10 values to ensure the correct amount of oil is dispensed each time. The meter also has a memory function which shows the last 5 transactions, including the date, time and volume delivered.

This preset oil nozzle is suitable for Motor Oil, Hydraulic Oil, Gear Oil, Automatic Transmission Fluid (ATF) and Anti-Freeze Solutions.

Can be programmed to measure in Gallons, Quarts, Pints or Litres.