Oil Flow Meters & Gauges

The Piusi K600/4 Digital Fuel Flow Meter is designed for counting the amount of diesel or oil that has been dispensed and giving the user a visual indication of this on its electronic display. With a maximum flow rate of 150 litres per minute, this diesel flow meter is an ideal metering option for higher flow diesel transfer applications where larger quantities of fuel are being handled.

The Piusi K600/4 fuel counter meter is reliably manufactured in Italy and benefits from high levels of accuracy in its reading. These oil and diesel fuel flow meters also have an incorporated inlet filter to remove any large debris before it enters the meter body.

The Next/2 Oil Nozzle from Piusi is the Pistol-One, heavy duty oil nozzle with integrated digital flow meter. These oil nozzles benefit from high flow capacity and low pressure losses combined with high metering accuracy. This Piusi nozzle is available with rigid, flexilbe or no spout.

The K400 Oil Nozzle is the Piusi Easyoil nozzle with a digital flow meter built in. These fuel nozzles therefore offer the user the ability to control the amount of diesel, oil or raps oil delivered at the nozzle end. The models of these diesel and oil nozzles that come with the automatic non-drip spout, come either with a flexible or rigid spout, and prevent any leakage from the end of the spout once you have finished dispensing.

The Piusi K40 Oil Nozzle is a compact, reliable, lightweight flow meter built into the Piusi Easyoil nozzle. This allows users of these fuel nozzles to control the quantity dispensed of diesel, oil or raps oil at the nozzle end. Versions of this model come with a flexible or rigid automatic non-drip spout, which prevents any leakage from the end of the spout after you have finished dispensing. The meter on this diesel and oil nozzle has oval gears and a resettable counter for individual dispensing.

The Piusi K500 Preset Oil Nozzle is designed to perform the pre-selected dispensing of oil through use of its automatic spout. Using this spout, the meter incorporated in the nozzle automatically closes the valve when the pre-selected quantity has been dispensed. These Piusi oil nozzles have a trigger protection to prevent accidental operation outside of the pre-select dispense, and a pressure moulded body that is resistant to high pressures.

The Reservoir Sight Level Gauges are simple and cost-effective tank contents gauges that give an easy visualisation of the fluid level in a container. Comprised of a high visibility lens moulded in shatterproof, transparent polymide, this sight level tank gauge gives a clear and instant level indication.

Suitable for tanks containing most fluids, primarily oils, water and diesel, this tank level indicator is designed for both front and rear installation by just drilling two holes into the tank for the bolts. Once tightened, they provide a leak-free seal.

There are different size versions available of the reservoir sight level tank gauges depending upon the container's size and the level that the user wishes to monitor.

The Push Button Oil Tank Sight Gauge is a traditional, economical model of heating oil tank gauge, primarily installed on domestic tanks. It works via a simple push to read button, which when pressed, the oil tank level indicator provides the user with an immediate visual indication of the tank’s contents.

This oil tank level gauge is constructed of a quality, corrosion resistant zinc plated brass and is suitable for use on both steel and plastic bottom outlet fuel tanks. A user friendly benefit of this fuel tank gauge is that it remains isolated when the button is released.

The MT Profil Fuel Tank Float Gauge from Afriso is a small mechanical clock gauge for measuring the tank's contents by a float that sits on the fuel and goes up and down with the level. Whilst also popular for diesel storage tanks, it is most commonly used as a domestic heating oil tank gauge. The small display shows a scale of Empty 1⁄4, 1⁄2, 3⁄4 and Full for factory calibrated versions, allowing the user to quickly identify the approximate fuel tank level.

This oil tank level gauge is available in different versions depending upon the specific height of the fuel tank, or there is an 8'0 adjustable version. The 8'0 adjustable version of the MT Profil oil tank float gauge displays the level reading in cm, and has a reversible display which goes to 150cm max on one side, and 250cm max on the other.

These oil tank gauges are supplied as standard with 1 1⁄2” BSP Male for easy fitting on the top of the storage tank or drum. If your tank has a 2" BSP hole, you can fit this gauge by purchasing a 2" x 1 1/2" reducing bush. If your tank has a vent hole, you can connect the gauge by fitting a 2" barrel nipple into the hole and adding a combi vent cap which has a 1 1/2" BSP thread to screw in the gauge to prevent an additional hole being drilled.

The K600/3 is an electronic gear flow meter used for controling of the dispensing of fuels and anti-freeze liquid for non-commercial use. The K600/3 as an electronic flow meter shows on the display a partial total of 5 digits (h=11.5 mm) with floating point from 0.001 to 999.99 Total, not resettable to 8 digits (h=5 mm) from 1 to 99999999.

MADE IN PIUSI RELIABILITY

The K600/3 flow meter features acetal resin oval gears for monitoring the dispensing of diesel and other special fluids compatible with the construction materials. Equipped with an aluminium measuring chamber body, it consists of an integrated suction filter to ensure safe dispensing without impurities, which otherwise could cause unpleasant blocks while dispensing.

HIGH PRECISION

The K600/3 flow meter for diesel and anti-freeze liquid ensures a monitoring accuracy of +/- 0.5% for a maximum flow rate of 100 l/min.

These features complete the K600/3 flow meter:

Repeatability 0.2%

Pressure drop < 0.5 bar at the maximum flow rate.

The Piusi K600/3 Fuel Pulse Meter is designed to count the delivery of diesel, lubrication oil, raps oil and anti-freeze at a maximum flow rate of 100lpm. These Piusi diesel pulse meters do not provide a reading, as they are generally used with an external system or display, when the amount of fuel used needs to be accessed elsewhere. The K600/3 fuel flow meter with pulse output is a versatile meter making it a solution for many applications.

Flow rate 10 - 100 l/min (Diesel), 6 - 60 l/min (Oil)

Fluid viscosity 2 - 5.35 (Diesel) – 10 - 2000 (Oil)

Pulses per litre 35 (Diesel) – 33 (Oil)

1” F BSP Flanged Inlet/Outlet (Diesel) – 3/4" (Oil)Oval gear system

Accuracy +/-0.5% after calibration

Inlet filter

The K44 is a mechanical flow meters suitable for the monitoring of diesel, It has a partial indicator with 4 digits (max. 9999 Litres), with a total of 7 digits.

PRECISION AND QUALITY

The K44 mechanical diesel flow meter have been designed for precise measurement of the quantity of fuels dispensed for non-commercial use. Easy to calibrate and install, the K44 flow meter can monitor the quantity dispensed for a maximum flow rate of 20-120 l/min and with a maximum working pressure of the pump of 10 bar. In addition, it can guarantee a burst pressure of 30 bar with a metering accuracy of +/- 1%.

RELIABILITY

The K44 mechanical flow meter for diesel is easy to calibrate at the place of installation and is suitable for installation on pumps or service stations for diesel, for those who want to keep the amount of dispensed fluid monitored without special needs for storage.

It is reliable and an economic mechanical flow meter that can also be used by gravity, thanks to the low resistance to flow.