Locking Angle Gate Valve

The Stainless Steel Foot Valve and Strainer is a spring loaded non return valve, which has the additional benefit of ensuring that the fuel being drawn is free from any large particles that could damage the pumping system. These foot valves are ideal for use on corrosive fluids that need to be kept free of material contamination.

The Piusi SEC IBC Connectors have been designed by Piusi to overcome issues associated with the traditional lever based CDS connector.

These IBC connectors work by screwing the valve open/closed without acting any angular pressure on the IBC connection point. Once connected, the SEC valve ensures that the AdBlue™ is not contaminated by the surrounding environment of the IBC tank. These come as standard with the Suzzara Blue IBC AdBlue pump kits.

The Adam Pumps PA1 70 Diesel Transfer Pump is a low cost, high quality Fuel pump manufactured in Italy. Due to the design of this pump, it can replace similar types of pumps as the location of the Inlet/Outlet ports & Footprint of the pump are the same as many others. With a low noise output & a 66 Litre per minute maximum flow rate, the PA1 70 from Adam Pumps is an economical choice for diesel transfer.

Adam Pumps 230v PA1 70 Specification -

230v 50hz Pump

On / Off Switch

IP55 Weather Protection

2 Metre Power Cable

1" BSPP Female Inlet / Outlet

Duty Cycle: Continuous Duty

70 L/min maximum flow rate

Max pressure: 2 bar

Integral Bypass valve

-20/+50 °C maximum operating temperature

Suitable for Diesel Only

1 Year Warranty

SAMOA Reelmaster RM-12CLX individually enclosed slim hose reel for synthetic and mineral oils.

• Totally enclosed reel in steel plate finished in polyester resin.
• Fatigue resistant steel spring for years of durable performance and even load when pulling and recoiling the hose.
• Full port shaft and swivel for no restrictions.
• Spool mounted on two permanent lubricated and sealed ball bearings to reduce torque load on spring for smooth retraction and longer life.
• Large effective radial latching area for easier operation.
• Positionable mounting brackets to accommodate any method of mounting.
• Large service panel allows hose reel maintenance without dismounting it.
• Hose reels with hose include 0.8 m inlet hose.

Hose length: 10 or 15 metres

Hose Internal Diameter: 1/2"

Connecting Hose Inlet: 1/2" BSP (M)

Delivery Hose Outlet: 1/2" BSP (M)

Pressure Rating: 160 bar

Weight: 22-23kg (with hose)