Piusi K150 ATEX Mechanical Fuel Flow Meter

The K44 is a mechanical flow meters suitable for the monitoring of diesel, It has a partial indicator with 4 digits (max. 9999 Litres), with a total of 7 digits.

PRECISION AND QUALITY

The K44 mechanical diesel flow meter have been designed for precise measurement of the quantity of fuels dispensed for non-commercial use. Easy to calibrate and install, the K44 flow meter can monitor the quantity dispensed for a maximum flow rate of 20-120 l/min and with a maximum working pressure of the pump of 10 bar. In addition, it can guarantee a burst pressure of 30 bar with a metering accuracy of +/- 1%.

RELIABILITY

The K44 mechanical flow meter for diesel is easy to calibrate at the place of installation and is suitable for installation on pumps or service stations for diesel, for those who want to keep the amount of dispensed fluid monitored without special needs for storage.

It is reliable and an economic mechanical flow meter that can also be used by gravity, thanks to the low resistance to flow.

The K33 ATEX is a mechanical flow meter suitable for the monitoring of diesel, gasoline and kerosene. For non-commercial use, the K33 ATEX meets the ATEX requirements for precise measurement of the quantity of Gasoline, kerosene and diesel dispensed in environments with a high risk of explosion.

The ATEX mechanical flow meter has a 3-digit partial indicator, and a 6 digit totaliser.

PRECISION AND QUALITY

The K33 ATEX mechanical flow meter for gasoline, kerosene and diesel has been designed to ensure precise measurement of the amount of fuel dispensed. Easy to calibrate and install, the K33 ATEX flow meter can monitor the quantity of fuel dispensed for a maximum flow rate of 20-120 l/min and with a maximum working pressure of the pump of 3.5 bar. In addition, it can guarantee a burst pressure of 28 bar with a metering accuracy of +/- 1%.

RELIABILITY

The K33 ATEX mechanical flow meter for gasoline, kerosene and diesel is suitable for application to pumps or gasoline dispensers and is suitable for those who are looking for a simple and economic product, without particular need for control over the fleet of vehicles. The K33 ATEX can be installed in any position on both rigid and flexible pipes, as well as directly on pumps or tanks. It can also be used by gravity, thanks to its low resistance to flow.

The K33 ATEX as an ATEX flow meter is included in group II, category 2 G IIB T=85°C (T6), and therefore it is suitable for working in areas classified as "1" and "2" according to directive 99/92/EC.

The K24 ATEX/IECEx is the new flow meter for measuring the dispensed quantity of Gasoline, kerosene and diesel for non-commercial use.

ATEX/IECEx QUALITY

The digital flow meter for Gasoline, kerosene and diesel meets the ATEX/IECEx requirementsf or the use of materials in potentially explosive atmospheres. The K24 ATEX/IECEx has a sturdy aluminum body and a sealed electronic board, making it suitable for use in all working conditions.

Easy to install, in line or at the end of the dispensing pipe, it has a display that can be applied in various positions to facilitate reading. It is the ideal tool for managing the fluid dispensed.

The range of PIUSI mechanical flow meters has been expanded with the new K150, the medium-high flow meter suitable for measuring fuel dispenses.

Suitable for heavy-duty environments
The K150 mechanical flow meter is specifically designed to be used where a high flow rate is required, for example in those sectors that need to operate on vehicles with large tanks.

The K150 is perfect in the agricultural sector for the supply of machinery and heavy vehicles, in the logistics sector for trucks, and in the construction sector for off-road vehicles.

Laboratory tested with 4 million litres delivered, the mechanical high flow K150 ensures a flow range between 25 and 150 l/min. The K150 differs from other PIUSI flow meters, including the K44 and K33 suitable for lower flow rates and the K700 suitable for flow rates up to 220 l/min.

Precision, a basic feature
Equipped with an oscillating disc reading system, the K150 high flow mechanical meter is accurate on the flow measurement Indication of the fuel delivered. This system also guarantees an accuracy of ±1% on the average flow rates.

Up to 33% less pressure drop
For professionals it is essential to have reliable and durable tools. The K150 high-flow meter stands out from other flow meters on the market because it guarantees up to 33% less pressure drop.

Resistance and reliability over time
The mechanical K150 high flow rate meter is an accurate product in presence of constant flows. It is easy to use and quick to calibrate. It is equipped with a 4-digit volumetric counter.

The robust aluminium body ensures great resistance to high pressures and wear. It has been designed to ensure constant calibration over time and low maintenance costs.

Not suitable for measuring products for the general public.