Hytek SPECTRA Wall Mounted Diesel Transfer Pump Kit

The K24 Flow Meter is a digital flow meter with a turbine suitable for AdBlue monitoring and the digital management of the fluid being dispensed.

PRECISION AND QUALITY

The K24 digital AdBlue flow meter has been designed to monitor the flow of AdBlue. Easy to install, in-line or at the end of the dispensing pipe, The K24 has a display that can be applied in various positions to facilitate easy reading. The sturdy housing and sealed internal electronic board make it suitable for use in virtually all working conditions.

RELIABILITY

The K24 Digital Flow Meter has a plastic body with a polypropylene turbine. The pulse type is single-channel, reed switch. The electronic board with an LCD display shows a partial reading of 5 digits from 0.1 to 99999, for a total of 6 digits 1 to 999999 Total, resettable. The display also shows the supported flow rate, up to a maximum of 120 litres per minute.

The K24 AdBlue flow meter guarantees a metering accuracy of +/- 1%; if the metering turns out inaccurate, the K24 can always be calibrated to ensure maximum precision in its operation. With a pressure drop of < 0.03 bar at 120 l/min and a repeatability of 0.2 %, the K24 flow meter is powered by two AAA batteries. Thanks to its rotating display, the K24 can be adapted to any application and working condition.

The GoldenRod 470-5 Fuel Filter Element is the replacement, 10 micron paper cartridge for the GoldenRod 495 fuel tank filter. You should change your GoldenRod filter element when you notice the flow rate of your system dropping, as this indicates the fuel storage tank filter is getting full.

We would recommend using the GoldenRod filter wrench when changing the paper element to limit the risk of cracking of the bowl whilst trying to screw it with force, and ensure it is screwed back on tight enough to prevent leaks.

Manufactured in Italy by Piusi is the Booster 60:1 Mobile Air Operated Grease Drum Pump Kit; part of their growing range catering for the lubrication market. This mobile grease transfer pump kit is a ready to dispense solution and comes with a grease gun, 4m delivery hose, drum cover and follower plate. This grease pump kit also comes with a 2 or 4 wheeled drum trolley (depending upon drum size), for easy manoeuvring of the pump around the workshop.

Thanks to its enhanced durability and low noise operation, this Piusi pump is ideal for those working in garage and workshop environments.

This high quality diesel transfer pump from FMT Swiss AG is manufactured from shock resistant Die-cast aluminium with extremely small tolerances. The small tolerances of this pump allow for great suction & pressure performance.

Fitted with an on/off switch, integral bypass & siphon protection, this 110v transfer pump is designed for a long service life and is capable of a 5 metre suction.

This transfer pump from FMT has an encapsulated electric motor, which in case of extreme temperature fluctuations, largely prevents the formation of condensed water and of short-circuits resulting thereof.

Specification - 

Continuous Operation

1.8 metre cable

1" BSP Inlet / Outlet

Self Priming Vane Pump with integral bypass

100 Litres per minute maximum flow rate

1.8 bar discharge pressure

5 Metre maximum suction height

Suitable for Fuel oils & Diesel

110v 50hz

Self resetting Thermal Protection

IP54 Safety rating

NBR 70 Seals

3 year warranty