Husky Wine and Whiskey Auto Nozzle

The EX75 is a higher flow version of the original Piusi EX50 ATEX approved fuel transfer pump. Designed specifically for the safe and efficient transfer of flammable liquids in a zone one environment, the EX75 12v fuel transfer pump satisfies the European directive for explosion proof equipment.

Primarily used as a petrol transfer pump, this model benefits from a sturdy, cast iron body and Italian quality manufacturing ensuring a long working life. It can be used for the mobile and static transfer of petrol, kerosene and diesel. This 12v fuel transfer pump is versatile and easy and safe to use in highly flammable environment. 

Designed for fuel dispensing and transfer, not fuel recirculation systems.

Please note: Power cables and connectors are dependent upon the individual site risk assessment for the connection method between the ATEX Piusi fuel pump and power source.

The Piusi CF60 Fuel Tank Filter can be fitted to both the suction and delivery systems to ensure that clean, particle free fuel is dispensed. This oil and diesel filter has a spin on cartridge for easy installation and replacement. When a flow rate reduction is observed, these fuel storage tank filters for diesel and oil should be replaced to ensure that the filtration of the fuel is maintained. Available in the accessories table is the Piusi CF60 filter element only for replacing the existing one when full. 

This Cim-Tek Fuel Filter is specifically designed for fitting to fuel bowsers with high flow pump systems. The Cim-Tek 70345 particles only fuel filter is designed for installations where space is an issue thanks to its shorter length design. This fuel tank filter is intended as a spin-on cartridge, meaning it can be easily replaced once it is full.  

The Cim-Tek Particle Bowser Fuel Filter is supplied as the element only, with a compatible head available as an accessory, as bowser manufacturers often develop a custom head.

The Piusi IBC Mounted Oil Transfer Pump Kits are a range of Viscomat pumps fitted to plate designed specifically for dispensing oil from an IBC. Depending upon the viscocity of the oil and flow rate required, there are options of either the Piusi Viscomat 70, 90 or Flowmat oil pumps. These kits come supplied with a Viscomat pump, IBC mounting plate, manual shut off nozzle, oil flow meter and 4 metre delivery hose.

These kits aren't supplied with a suction connector and so this would need to be purchased separately.