Husky Eagle Aviation Fuel Nozzle

The Ultraflow Cast Iron Rotary Hand Fuel Pump is an economical and simple solution for the manual dispensing of diesel and oil primarily from a drum, but also from other types of storage tanks. These rotary vane type hand fuel transfer pumps are a popular choice for transferring fuel when cost effectiveness is important, when only small quantities need to be dispensed at a time, or when no mains power is easily available. This manual diesel transfer pump is supplied with a 2” M BSP drum adaptor and three part rigid suction downtube.

The Piusi Open Automatic Oil Hose Reel is designed for high pressure oil dispensing systems in garage and workshop environments. Thanks to its sturdy steel structure and four way roller mechanism to stop friction wear to the hose when unrolling, this retractable oil hose reel is made to last even in heavy duty environments.

The Piusi open oil reels also benefit from adjustable arm brackets to allow for easy positioning and a hose stop for locking the hose at the desired length. Available with a choice of hose lengths or bare should the user wish to add their own specified hose, the Piusi retractable oil hose reel is suitable for a range of requirements.

The TigerLoop® De-aerator effectively removes all gas/air bubbles from the oil system, helping to eliminate any oil pump and nozzle problems associated with gas/air in the oil.

The TigerLoop® oil de-aerator preheats the oil by absorbing heat from the boiler room and friction heat from the oil pump, which reduces the problems associated with cold oil, gives cleaner combustion and enables reduced oil consumption.

This oil de-aerator has a single pipe design, meaning that no oil is transported back to the oil tank, and that any oil not required by the burner is re-circulated within the TigerLoop®.

Nozzle Capacity: 110 Litres per hour

Oil Flow: 230 Litres per hour

Maximum return oil: 120 Litres per hour

De-Aerating Capacity: 8 Litres per hour

The SAMOA Polaris Series transfer Pump is a self priming diesel pump with self-adjustable vanes, Pump body made of cast-iron with rustproof treatment, rotor of sintered steel and vanes of acetal resin. The pumps include a by-pass valve and a built in filter with easy access for cleaning. The pump can be mounted vertically or horizontally and has 1.8m cable with plug.

Inlet/outlet connection: 1" BSP (F) or flange coupling

Maximum suction lift: 2.5m

Pressure: 1.7 bar

230v - 50hz - 2.2 amp - 370 watt

Electric AC motor with IP55 protection, allow continuous operation duty.

On/off switch and fuse.