Husky High Flow Swivel

The Groz Fuel Filter Element is a replacement, 10 micron filter element for the Groz particle fuel filter.

Loxeal 11 Sealant Activator is a solvent based activating spray, for flanged or threaded joints, which cleans, degreases and speeds up the cure time. After applying the pipe sealant to the male end, spray the sealant activator on the female end and a cure time should be established between 20-120 seconds.

The Aquafighter Snake is a fuel tank water absorber designed to remove both free and suspended/emulsified water from fuel tanks of industrial machines, boats, and fuel storage tanks with small openings such as generator belly tanks.

The increase of bio content in fuel means that there is a rising issue associated with water contamination and microbial growth, which is responsible for a nasty sludge that blocks filters, damages equipment, corrodes engines and causes poor fuel efficiency. The Aquafighter water absorber eliminates these problems by reducing the water content levels down to 75ppm to meet the EN590 diesel fuel standards (200ppm), saving you costly damage and downtime. The diesel tank water absorber not only absorbs free water like other solutions on the market but also separates and captures the suspended and emulsified water in the fuel, which often gets left to cause serious damage to your vehicles and equipment. 

By working in this way, the Aquafighter Snake fuel tank water absorber provides numerous benefits including preventing diesel bug from forming, reducing filter replacement and need for tank cleaning and protecting the tank from corrosion. 

Please note: If this is your first time using Aquafighter, we recommend buying 2 units. The first can be added to absorb the current water, which may become full quickly if there is a large problem with water. The second to be added once the other has been removed to act as a prevention against future water content.

SAMOA Solura Blue 12v DC multi-diaphragm pump with no mechanical seals designed for dispensing AdBlue®/DEF and other water-based non corrosive products. Pump is self-priming and has a by-pass valve. Electric motors have IP55 protection and include on/off switch, fuse and 2m cable and crocodile clips.

Electric motor power: 260w

Inlet/outlet connection: 1" BSP (M)

Maximum suction lift: 1.8m

Maximum delivery pressure: 1.6 bar

Maximum delivery: up to 32 l/min