Husky AdBlue Reconnectable Safe-T-Break

This High Capacity Diesel Hose Reel, which comes in 25m and 30m, has extended our hose reel range by providing larger reels specifically designed for use with diesel. This fuel hose reel comes with BSP fittings, rather than the conical fittings often seen on larger reels, in order for easy connection to refuelling nozzles.

This retractable diesel fuel hose reel comes with a single or double spring for rewinding the hose, and can also be locked to a desired length via the automatic system. This diesel hose reel is ideal for environments where the vehicle being refuelled is unable to gain access to the fuel storage tank. This problem is typical of vehicles being refuelled on construction, plant and quarry sites, as well as boats being refuelled in marinas.

The 25m and 30m fuel hose reels are designed for use with industrial pumps up to 10 bar pressure.

The ZVA Automatic AdBlue™ Magnetic Nozzle is designed for use in conjunction with the ELAFIX 40 adaptor in order to prevent the costly miss-filling of AdBlue into the diesel tank. This magnetic spout ZVA nozzle will only allow fluid to pass once it has been magnetically opened by the ELAFIX AdBlue magnetic adaptor fitted within the vehicle filler neck. Therefore, by using this AdBlue nozzle you cannot physically dispense into the wrong tank, as the diesel fill point will not contain a magnet.

The miss-filling of AdBlue™ into the diesel tank is a common issue and will be costly for the vehicle owner to put right. AdBlue™ is not compatible with many materials and miss-filling can corrode the pipework and components of a fuel system – resulting in thousands of pounds of damage, as well as having to pay for the removal of AdBlue™ from the tank.

This automatic AdBlue™ nozzle is a well-known branded ZVA AdBlue™ dispensing option approved for use in heavy use, resale environments, such as those seen at the forecourt and service station. Due to these approvals it carries a higher price that than alternative AdBlue nozzle models.

The Husky Safe-T-Break® couplings are designed to disconnect the hose from the pumping system, in scenarios where a vehicle drives off with a nozzle still connected to the fill point. These Safe-T-Breaks® stop the installation having the whole pump system ripped out, therefore preventing both damage and spillages of fuel.

This Husky breakaway coupling is not re-usable and should therefore be disposed of after the initial break – a cost effective way of ensuring damage to the system is prevented. 

The standard models of these Safe-T-Break® couplings are designed for use with diesel, with a 3/4" ATEX approved version available for petrol. 

The GoldenRod Fuel Filter Housing is essentially a replacement bowl for use with GoldenRod filters, in the case of wear and tear/cracking of the existing casing. The Goldenrod filter elemet housing is transparent for inspection of the filtered impurities and complete with a drain point for easy removal of these.

The biggest cause of the filter bowl cracking is by applying too much pressure when trying to screw it off with force in order to replace the filter element. We recommend buying the GoldenRod filter wrench, a tool specially designed to remove and replace the bowl without causing damage.