Husky 1GS Automatic Nozzle

This Oil Spill Kit contains all you need to simply and quickly deal with an oil spill in a portable and easy to access clip close carrier. Designed to absorb all hydrocarbon based oils, fuels, lubricants and petroleum based liquids, this emergency spill kit is a must have for wherever fuel or oil is stored, delivered or handled. Versions are available to clean up 10litres, 20litres and 40litres depending upon the individual requirements.

This Oil Spill Kit includes oil spill socks for containing the spill and stopping it spreading. These booms have a very flexible outer skin to ensure each have a high fluid absorbency of 7.5litres and high spill retention by moulding to the surface they are laid on. It also includes oil spill pads for absorbing the remaining fluid, each with a capacity of 1.1litres.

Due to their hydrophobic nature, the spill absorbents do not soak up water making them ideal for applications where water and oils must be separated. The spill pads remain buoyant in water, even when fully saturated, allowing them to absorb oil off the top.

The Husky Nozzle Service Kit is a complete kit for the removal and installation of nozzles in a clean and simple way – for use with Husky nozzles and other styles of forecourt nozzle. The service kit comes with a stainless steel pail, nozzle holder – which keeps the fuel nozzle off the floor, breakaway drain cup and a fuel filter drain cup.

The kit provides a safe way of collecting fuel when the Husky nozzle, breakaway and filter are taken apart – allowing the remaining fuel from each part to be drained safely into the provided containers. Each of the drainage containers allow any brand and style of nozzle, breakaway or filter to be used with the kit. The pail also doubles up as a container for all the components, so that the kit can be easily transported.

The Husky Safe-T-Break® couplings are designed to disconnect the refuelling system, so that the hose breaks off from the pump in the event where a vehicle drives off with the nozzle still attached to the fill point.

These Safe-T-Breaks® stop the whole pump system being pulled away from the installation, therefore preventing fuel from spilling out onto the forecourt. This type of Husky breakaway coupling is re-usable, and can therefore help to prevent damage and fuel spillages again and again. Watch this video on how to reconnect the coupling. 

The standard models of the Safe-T-Break® couplings are designed for use with diesel, with a 1" ATEX approved version available for petrol.