Husky 1690 Tanker Automatic Diesel Nozzle

The TigerLoop® De-aerator effectively removes all gas/air bubbles from the oil system, helping to eliminate any oil pump and nozzle problems associated with gas/air in the oil.

The TigerLoop® oil de-aerator preheats the oil by absorbing heat from the boiler room and friction heat from the oil pump, which reduces the problems associated with cold oil, gives cleaner combustion and enables reduced oil consumption.

This oil de-aerator has a single pipe design, meaning that no oil is transported back to the oil tank, and that any oil not required by the burner is re-circulated within the TigerLoop®.

Nozzle Capacity: 110 Litres per hour

Oil Flow: 230 Litres per hour

Maximum return oil: 120 Litres per hour

De-Aerating Capacity: 8 Litres per hour

This Brass Solenoid Valve is a direct acting valve, meaning that no pressure needs to be applied to operate, for a range of fluids including fuels, oils and water. As a normally closed solenoid valve, until the valve is activated the fluid flow is shut off. When the electrical current that runs through the coil inside the valve is energised, the valve opens and allows the flow of liquid through the pipework.

This brass solenoid valve is therefore designed for applications where fluid only needs to be released on occasions, such as to feed a generator with diesel from the back up storage tank. It could also be wired into a pump ensuring that fuel only enters the pipework from the tank when the pump is turned on.

The Piusi Oil Bucket Lever Hand Pump is a lever hand pump fitted with its own 16kg capacity oil bucket container. This cost effective solution for dispensing small quantities of oil has a sealed lid to prevent contamination which can also be unscrewed to refill the container from a drum. This oil transfer pump has an integrated carry handle for easy manoeuvrability around the workshop and a foot plate to keep the pail sturdy whilst the pump is in operation.

These Piusi pumps come with 2 meters of flexible delivery hose, a spout and suction downtube; everything you need to begin dispensing immediately.

SAMOA Reelmaster RM-100 heavy-duty hose reel for compressed air, low pressure water, antifreeze solutions and diesel.

• Very tough construction able to stand regular use and abuse in Intensive Duty applications.
• Fatigue resistant steel spring for years of durable performance and even load when pulling and recoiling the hose.
• Full port shaft and swivel for no restrictions.
• Spool mounted on two permanent lubricated and sealed ball bearings to reduce torque load on spring for smooth retraction and longer life.
• Large effective radial latching area for easier operation.
• Hose guide arm can be placed in different positions to accommodate any method of mounting.
• Narrow footprint allows accommodating more reels on the same surface.

Hose length: 15 metres

Hose Internal Diameter: 1½"

Connecting Hose Inlet: 1½" BSP (F)

Delivery Hose Outlet: 1½" BSP (F)

Pressure Rating: 20 bar

Weight: 87kg (with hose)