Hose & Hose Reels

The Camlock Male Adaptor with Female Thread has a 1” female BSP hose connection, and is available in either 1” or 2” male cam. Cam and groove couplings are designed to quickly connect and disconnect hoses without the use of tools, and offer a leak proof seal.

The Camlock Male Adaptor with Male Thread has either a 1” or 2” male BSP hose connection, and a 1” or 2” male cam respectively. Cam and groove couplings are designed to quickly connect and disconnect hoses without the use of tools, and offer a leak proof seal.

The Azure AdBlue™ Tank Coupler is designed to fit onto the fill point of an AdBlue™ storage tank. It is a screw connect dry break valve that enables a spill-free connection to the tanker refilling hose.

This AdBlue™ tank coupler benefits from a sturdy stainless steel construction and is interchangeable with many other brands of coupling.

The Piusi HQC Quick Release Couplings are specially designed for diesel transfer applications. The inner bore of these hose couplings are slightly larger than traditional couplings that are usually designed for hydraulic oil. This minimises the resistance that occurred when the bores were too small for the higher diesel transfer flow rates.

Both the coupler and nipple are supplied as one complete quick release coupling assembly, and they come complete with red plastic caps to prevent any leakages. 

The ISO B Series Compatible Quick Release Couplings are general purpose, plated steel hose couplings. They instantly seal upon disconnection and have an o-ring in the socket seals to ensure that there are no leakages.

The coupler and nipple are sold separately, and are compatible with Hansen HK, Parker 60, Rectus 71-79 and ISO 7241-1 Series B.

The H Series Compatible Quick Release Couplings are general purpose, plated steel hose couplings. They instantly seal upon disconnection to prevent any leakages, and benefit from a smooth jet valve design with a safety pin system to prevent the accidental disconnection of the quick release couplings. The coupler and nipple are sold separately, and are compatible with Snap-Tite H and US-MIL-C-51234.

The Husky AdBlue Safe-T-Break® couplings are designed to disconnect the hose and nozzle from the pump, in situations where the nozzle is still attached to the fill point and the vehicle drives off.

The Husky Safe-T-Breaks® prevent the whole AdBlue™ tank installation from being ripped away, therefore stopping AdBlue, otherwise known as DEF, from spilling out onto the floor.

This Husky breakaway coupling is 100% compatible with AdBlue and is re-usable, therefore helping to prevent damage and fuel spillages again and again once reconnected.

The Husky Safe-T-Break® couplings are designed to disconnect the hose from the pumping system, in scenarios where a vehicle drives off with a nozzle still connected to the fill point. These Safe-T-Breaks® stop the installation having the whole pump system ripped out, therefore preventing both damage and spillages of fuel.

This Husky breakaway coupling is not re-usable and should therefore be disposed of after the initial break – a cost effective way of ensuring damage to the system is prevented. 

The standard models of these Safe-T-Break® couplings are designed for use with diesel, with a 3/4" ATEX approved version available for petrol. 

The Husky Safe-T-Break® couplings are designed to disconnect the refuelling system, so that the hose breaks off from the pump in the event where a vehicle drives off with the nozzle still attached to the fill point.

These Safe-T-Breaks® stop the whole pump system being pulled away from the installation, therefore preventing fuel from spilling out onto the forecourt. This type of Husky breakaway coupling is re-usable, and can therefore help to prevent damage and fuel spillages again and again. Watch this video on how to reconnect the coupling. 

The standard models of the Safe-T-Break® couplings are designed for use with diesel, with a 1" ATEX approved version available for petrol.

The Mikalor Supra W2 Hose Clamps are heavy duty hose clips for the most demanding of hose assemblies. They benefit from a swivelling bridge which allows the clamp to be mounted in awkward applications without having to remove the hose.

Mikalor clips can also be opened and fastened in place without dislodging other parts, and have bevelled edges to protect the hose from damage. These hose clips are popular for industrial, automotive and agricultural machinery hoses.

The Hi-Grip Stainless Steel Hose Clamps are designed for hoses with 25mm to 35mm OD, meaning that only one version needs to be stocked for a range of hose sizes.

These hose clips are made entirely of 18/8 marine quality stainless steel making them suitable for salt water and other highly corrosive applications. They are Lloyd’s Register approved for marine, offshore and industrial use.

The Husky high flow swivel is used on nozzles when the maximum flow rate that the nozzle is able to achieve needs to be guaranteed – for example, the Husky VIII nozzle.

High flow nozzles such as the Husky VIII Diesel Nozzle are often used for refuelling large plant equipment, agricultural machinery and lorries, and the user may therefore need to maintain the flow to fill the fuel tank as quickly as possible.

This high flow swivel has been designed so that flow rates of up to 378 lpm can be achieved, whilst also allowing free movement to the nozzle.