Horn Tecalemit Fuel Management Transponder Tags

The K44 is a mechanical flow meters suitable for the monitoring of diesel, It has a partial indicator with 4 digits (max. 9999 Litres), with a total of 7 digits.

PRECISION AND QUALITY

The K44 mechanical diesel flow meter have been designed for precise measurement of the quantity of fuels dispensed for non-commercial use. Easy to calibrate and install, the K44 flow meter can monitor the quantity dispensed for a maximum flow rate of 20-120 l/min and with a maximum working pressure of the pump of 10 bar. In addition, it can guarantee a burst pressure of 30 bar with a metering accuracy of +/- 1%.

RELIABILITY

The K44 mechanical flow meter for diesel is easy to calibrate at the place of installation and is suitable for installation on pumps or service stations for diesel, for those who want to keep the amount of dispensed fluid monitored without special needs for storage.

It is reliable and an economic mechanical flow meter that can also be used by gravity, thanks to the low resistance to flow.

The Oil Measure Jug from Piusi is a handy tool designed to aid a cleaner workstation. The jug cover and the cap fitted at the end of the spout ensure the safer handling of oil and the prevention of spillages.

The Stainless Steel Fuel Tank Filler Cap is designed to cap off the fill point on a storage tank, tanker faucet or valve. This robust solution prevents unwanted debris and water from entering into the tank fill point, as well as preventing dripping. This stainless steel fuel tank filler cap comes with lugs either side of the cap to enable easy application and removal.

Please note: This tank fill point cap is supplied as standard with leather seals, making it ideal as a diesel or oil tank cap. PTFE seals are available on request for use with aggressive fluids such as on chemical tanks.

The Aluminium Fuel Tank Vent Cowl is designed to fit over the male thread on the top of an above ground storage tank to provide ventilation. These vent cowls come three lugs for direct fitting, one with an Allan key screw fitting to help secure the cowl to the male thread of the tank.