Heating Oil Accessories

The TigerLoop® Bio Combi De-aerator is suitable for use with kerosene, gas oil and also biofuel blends up to B100. The TigerLoop de-aerator removes all gas/air bubbles from the system, eliminating the pump and nozzle problems that are caused by gas/air in the fuel.

This bio and oil de-aerator has the additional benefit of an integrated 20 micron oil particulate filter, which allows varying filtration options. This TigerLoop® de-aerator is constructed of metal materials and comes with a connection to safely remove vapours via a tube, allowing it to be suitable for use in and outdoors.

The TigerLoop® Bio De-aerator can remove gas/air bubbles out of kerosene, gas oil and biofuel up to B100. By doing this, the TigerLoop oil de-aerator helps to prevent problems experienced by the pump and nozzle that result from air in the fuel system. The TigerLoop® de-aerator for bio is also constructed of metal materials and comes with a connection to safely remove vapours via a tube, allowing it to be suitable for use in and outdoors.

The TigerLoop® Combi De-aerator is designed to eliminate all gas/air bubbles from the oil system, in order to reduce the harm that this can cause to the pump and nozzle. This TigerLoop de-aerator has the additional benefit of an integrated 20 micron oil particulate filter, which allows varying filtration options. The installation of the TigerLoop® oil de-aerator is done with few connections, consequently simplifying work and reducing the risk of joint leakages. 

The TigerLoop® De-aerator effectively removes all gas/air bubbles from the oil system, helping to eliminate any oil pump and nozzle problems associated with gas/air in the oil.

The TigerLoop® oil de-aerator preheats the oil by absorbing heat from the boiler room and friction heat from the oil pump, which reduces the problems associated with cold oil, gives cleaner combustion and enables reduced oil consumption.

This oil de-aerator has a single pipe design, meaning that no oil is transported back to the oil tank, and that any oil not required by the burner is re-circulated within the TigerLoop®.

Nozzle Capacity: 110 Litres per hour

Oil Flow: 230 Litres per hour

Maximum return oil: 120 Litres per hour

De-Aerating Capacity: 8 Litres per hour

The Nylon Basket Strainer is designed to be attached to suction lines or non return valves, in order to protect pumping system components by filtering large debris particles. These basket strainers have a high quality nylon body with precise moulded threads.

The Stainless Steel Inline Y Strainer is designed to filter large particles in chemical applications, such as rigid pipe AdBlue™ installations. The body of this inline fuel filter is constructed of stainless steel, and has a removable 1000 micron stainless steel strainer.

800psi Rated, Temperature -20°C to 176°C.

The Cim-Tek Tank Dryer is a fuel tank water absorber, which has been developed in response to the increasing concerns regarding water contamination of fuel. By checking for, and removing any unwanted water, the Tank Dryer reduces the damaging impact that this contamination has on machinery and vehicles. The Tank Dryer, or 'tank sock' as it is often referred to, contains highly absorbent silica gel, which when lowered into the tank absorbs up to 350ml of water.

The Kolor Kut Water Finding Paste is a useful tool to detect the presence of water in your fuel tank. Apply it to a piece of string or a clean rod, and lower it to the bottom of the tank. The brown paste will turn red when in contact with water, indicating the depth of the water in the tank. If the Kolor Kut water finding paste detects water in your fuel tank, we recommend that you use one of our Tank Dryers to remove this.

Also refered to as a 'Tank Pack' or 'Bottom Outlet Kit' This filter assembly kit is a filter designed for heating oil tanks and comes complete with everything that is required to quickly and simply install it.

This kit has an optional Ultra Compact Isolation Valve, which is designed to replace the 1" x ½” conical fitting that is supplied in the standard kit. By doing this, the isolation valve becomes the first compotent to be screwed into the tank. This would allow an engineer to replace the filter without draining the contents of the tank should the filter ever need changing.

The Ultra Compact Oil Tank Filter Kit is designed for bottom outlet domestic heating oil tanks to remove debris with instant isolation and no pollution risk. The kit is comprised of the Ultra Compact isolation valve, 50 micron oil filter, PTFE tape, Heldite and all of the fittings required for installation. 

On other oil tank filter assemblies, an isolation valve is not the first component screwed into the tank which means that if the filter valve needs replacing then the tank needs to be drained. By having the Ultra Compact valve installed first, this filter assembly kit saves the engineer the couple of hours it would previously have taken to pump the tank out, replace the filter valve and then pump the heating oil back in. 

The Ultra Compact oil tank isolator valve is also available alone to replace the 1" BSPT x 1/2" BSPP adaptor if a generic filter kit is already installed. Both the filter kit and the valve alone can be retrofitted during service or at the time of the original tank installation. 

The CTS Ultra Compact Oil Tank Filter Kit is designed for bottom outlet domestic heating oil tanks to remove debris with instant isolation and no pollution risk. The kit is comprised of the Ultra Compact isolation valve, 40µ cleanable alloy bowl filter and all of the fittings required for installation. 

On other oil tank filter assemblies, an isolation valve is not the first component screwed into the tank which means that if the filter valve needs replacing then the tank needs to be drained. By having the Ultra Compact valve installed first, this filter assembly kit saves the engineer the couple of hours it would previously have taken to pump the tank out, replace the filter valve and then pump the heating oil back in. 

The Ultra Compact oil tank isolator valve is also available alone to replace the 1" BSPT x 1/2" BSPP adaptor supplied with generic filter assemblies e.g. the ARMKIT. Both the filter kit and the valve alone can be retrofitted during service or at the time of the original tank installation. 

The Plastic Heating Oil Bowl Filter is designed for removing debris and water from small bore fuel lines such as domestic oil heating systems. Its clear plastic bowl allows the user to see the remnants of the filtering process, and has a drain port for the easy removal of the filtered out water. This heating oil filter is also suitable for biodiesel up to B30.