440 Litre Harlequin Portable Diesel Dispensing Tank

Manufactured in the UK from Mild Steel Plate, this Steel Bunded Heating Oil Tank is suitable for the storage of most fuels and light oils.

Included with this Bunded Oil Tank is -

Bund Gauge

Tank Contents Gauge

2" BSP Fill Point with Cap

2" BSP Tank Vent with Cap

1" BSP Base feed with Isolation Valve

Top Lift points (Lift empty only)

1" BSP Spare socket into bund

10 Year Guarantee

This self bunding, steel oil storage tank is manufactured to comply with all current regulations.
Suitable for above ground instillations at Domestic, Commercial, Agricultural and industrial locations for storage of Paraffin, Kerosene, diesel oils and light lubricant oils.

Both the inner and outer tanks are constructed from mild steel plate to BS EN 10025.The inner tank providing the required storage area, the outer tank forms the required bund, with capacity of 110% of the total liquid being stored.

The tank vent is piped into the bund then to atmosphere further reducing the risk of spills in the event of overfilling the tank. Tanks are fitted with steel base supports to eliminate ground contact with the tank base. The tanks can also be fitted with steel legs to raise of the floor for gravity feed applications

Compliancy: BS799 part 5, Control of pollution (oil storage) (England) Regulations 2001, PPG2, PPG26.

The Harlequin range of Transfuel Tanks are portable diesel tanks that fully comply with Control of Pollution (Oil Storage) Regulations (2001) (England and Wales) (N. Ireland 2010) (Water Environment (Oil Storage) (Scotland) Regulations 2006).

These are used to dispense fuel from a static location without the need for additional bunding or spill trays! No specialist driver qualifications are required and no vehicle modifications needed in order to use the Transfuel tanks.

These time and money saving portable tanks allow for transport of diesel simply by loading the tank into or onto the vehicle – saving valuable time and money in not having to bring the vehicle to the pumps! Transfuel tanks also enable safe dispensing of fuel with virtually no effort.

This 430-litre Transfuel Bunded tank, is the first plastic-on plastic portable fuel tank on the market which
enables you to safely and legally transport and dispense fuel on-site. Since it can be loaded onto any vehicle it saves valuable time and money in not having to bring the vehicle to the pumps. A factory fitted Piusi By-Pass 3000 Pump, 4m hose and a dispensing nozzle allows the fuel to be dispensed with virtually no effort.

Specialist driver qualifications and vehicle modifications are not required to use a Transfuel Bunded tank. It fully complies with the Control of Pollution (Oil Storage) Regulations (2001) (England and Wales) (N. Ireland 2010) and Water Environment (Oil Storage) (Scotland) Regulations 2006.

Tank Dimensions:

Length: 1010mm

Width: 1260mm

Height: 1090mm

Weight: 110Kg

Capacity: 426 litres

Piusi Pump Specifications:

Cast iron pump body finished with anti-corrosion paint

Flow rate up to 50 lpm

Vane pump with sintered steel rotor and acetal resin vanes

By-pass valve incorporated in the pump body

Available with 12 or 24 volt direct current motor

Motor protection grade IP55

Used in intermittent service with 30 minute work cycle

Pump attachment support bracket

The Titan 1225 FuelMaster Standard is a slimline 1225 litre diesel dispensing tank designed for customers who have low fuel usage & do not need to keep a record of dispensed fuel. This double skinned diesel tank comes with all necessary dispensing equipment, and is backed by a 10 year product guarantee. 

The Titan FM1225ST comes complete with -

Lockable Cabinet with Green Door

230v 56L/min Pump

4 metres of 3/4" Dispensing hose with Piusi A60 Automatic Nozzle

Nozzle Holder

Manual Level Gauge

10 Micron Water/Particle filter

2" BSP Coupling Fill Point

Spillstop mechanical overfill prevention valve

10 year guarantee (on tank)

The Titan FuelMaster Standard range is a cost effective solution where additional dispensing equipment is not required. 

FuelMaster Standard Specification -

Double skinned construction
Green Door
56 L/min Diesel Transfer Pump
4m 3/4” Delivery Hose
A60 automatic nozzle
Nozzle holder
10 micron particle and water filter
Filling through 2” BSP Coupling
Spillstop mechanical overfill protection
Manual Level Gauge

2000 Litre Road Towable UN 1202 (For Road Haulage) Certified Bowser - Twin Axle

This 2000 litre road towable UN 1202 Certified Bowser is the perfect solution for transporting fuel or other liquids. It is manufactured from high-quality materials, and is built to last. The bowser is easy to tow and maneuver, and it is equipped with all the necessary safety features.

• 2000 litre capacity
• UN 1202 (For Road Haulage) certified
• Hot dip galvanized steel chassis
• Single Knott-Avonride 1500kg torsion beam axle fitted with auto reverse breaks
• 175 x 13 x 8 ply radial tyres, with 4 stud 5½" PCD rims
• Knott-Avonride 3000kg posibrake over run auto reverse with spring assisted handbrake lever, breakaway cable & 40mm ring eye or 50mm ball hitch
• Cylindrical steel welded construction with polyethylene inner tank
• Lockable hinged steel flap lid for easy access to tank and equipment
• The tank is fitted with lower fork lift mounts for moving the tank whilst not mounted in the trailer chassis
• Standard 2" BSP fill point with 1" manual vent & top mounted pressure relief valve

Benefits:

• Durable and long-lasting construction
• Easy to tow and maneuver
• Equipped with all the necessary safety features
• Available in different colours and with pumping equipment on request