GoldenRod 496-5 Water/Particle Filter Element

The CTS Battery Operated Multi-Compartment Fuel Tank Alarm system has three functions; to detect and warn of a fuel storage tank overfill, a high/low liquid level and a bund leak. If the tank level alarm identifies that any of these states have occurred, the zone in question will illuminate on the alarm’s screen, and a loud siren and flashing red light will go off. When its battery is low, this level bund alarm will sound a single beep every minute to alert the user of this.

Thanks to being battery powered, these fuel tank alarms are designed to be installed on isolated or portable systems, and each zone can be configured allowing the alarm to be customised by the installer. Options are available that come with three relays, allowing additional equipment to be connected to the tank level alarm such as larger alarm systems or building management systems for remote monitoring.

If you need a tank level alarm for a fluid other than diesel or light oil, also available are a water and chemical alarm probe, and a high viscosity oil tank level probe – which is also suitable for AdBlue as well as high viscosity oils.

The Piusi CF100 Fuel Tank Filter can be installed at either end of a fuel dispensing system to remove particles from the diesel or oil being transferred. Thanks to its simple and quick spin on cartridge, this oil and diesel filter can be easily replaced once the flow rate slows and the filter becomes full.

The GoldenRod 496 Fuel Tank Filter is the water block filter for diesel from the leading filtration brand in the agricultural market. Whilst used within many industries for filtering water out of the fuel in a diesel storage tank, thanks to being suitable for gravy fed installations as well as compatible pumping systems, GoldenRod fuel filters are widely recognised amongst the farming community. 

The 496 fuel tank filters benefit from a paper cartridge element inside a clear bowl with a drain point, allowing for the viewing and subsequent removal of any free water that have been removed from the storage tank contents. The element works by using water-absorbing polymers, which trap up to approximately half a cup of water before needing to be replaced. 

The Piusi Flipper Car AdBlue™ Dispenser is designed for the dispensing of AdBlue™ (DEF), specifically for refilling passenger cars. The dispenser is completed with a Self-priming Piusi Suzzara Blue Adblue™ transfer pump mounted securely onto the side of a drum trolley, enabling the pumping system to be moved with the drum wherever the dispensing point is. This ready to dispense portable AdBlue drum pump kit also benefits from a robust and sturdy connection to the trolly, protecting the pump from accidental impact. 

Designed as a portable solution for the dispensing of AdBlue™ specifically from a barrel, this electric AdBlue™ pump comes with a self-priming membrane Piusi AdBlue™ pump, Automatic SB325_X car nozzle, AdBlue® long life 200μ filter, delivery and suction hose and AF2 Trisure drum connector. The Piusi Flipper Car AdBlue™ Pump Dispenser is also equipped with a 4m cable for easy use in the workshop and a large practical hose holder, allowing the hose to be rolled securely and neatly.