FMT 3 Digit Mechanical Diesel Flow Meter

The K44 is a mechanical flow meters suitable for the monitoring of diesel, It has a partial indicator with 4 digits (max. 9999 Litres), with a total of 7 digits.

PRECISION AND QUALITY

The K44 mechanical diesel flow meter have been designed for precise measurement of the quantity of fuels dispensed for non-commercial use. Easy to calibrate and install, the K44 flow meter can monitor the quantity dispensed for a maximum flow rate of 20-120 l/min and with a maximum working pressure of the pump of 10 bar. In addition, it can guarantee a burst pressure of 30 bar with a metering accuracy of +/- 1%.

RELIABILITY

The K44 mechanical flow meter for diesel is easy to calibrate at the place of installation and is suitable for installation on pumps or service stations for diesel, for those who want to keep the amount of dispensed fluid monitored without special needs for storage.

It is reliable and an economic mechanical flow meter that can also be used by gravity, thanks to the low resistance to flow.

This diesel delivery hose assembly is a cost effective solution designed for gravity fed and low pressure pumping systems. Suitable for both oil and diesel, this dispensing fuel hose is available in a variety of lengths depending upon the customer application. These assemblies come with aluminium hose tails and ring ferrules for direct connecting to your installation.

The Aluminium Fuel Tank Filler Cap is a robust option to cap off the male threaded fill point on a fuel storage tank, tanker faucet or valves. A tank fill point cap is designed to prevent dripping and unwanted dirt and water from getting into the tank's fill pipe.

These models are often seen on a diesel or oil tanks, and although they are popular as an oil tank cap they can be used with any fluid compatible with the materials of construction. Complete with two large lugs for easy application, brass chain and a sealing washer, the aluminium fuel tank filler cap is a sturdy and durable option.

The Plastic Fuel Tank Filler Cap is a cost effective solution to cap off male threads on fill points on fuel storage tanks, tanker faucets and valves. The main function of a tank fill point cap is to prevent dripping and to stop unwanted debris and water from entering into the fill pipe. Whilst they are primarily sold as a diesel or oil tank cap, they are a multipurpose solution that can be used with any compatible fluid.

The plastic fuel tank filler cap is a basic option when no additional security is required, and benefits from small lugs positioned around the cap and an alloy chain and clip to make it easier to fit and remove by hand. 

The SpillStop 2” Overfill Prevention Valve protects both the environment and the individual from the effects of fuel spillage. This overfill protection device is suitable for use on both fuel and diesel storage tanks, which may have a pumping or gravity feed system. Once the tank has reached its maximum fuel capacity, this valve will close to prevent any additional fuel from being delivered, thus preventing overfilling. A version of this can be supplied specifically for use on plastic tanks.

Flow Rate Range (Litres per minute) - 35-600

Pressure Range (Bar) - 0.15-6

Working Temperature - -20/+50ºc