Flow Meters

The Piusi K400 digital fuel flow meter is designed to measure the quantity of diesel, oil or windscreen fluid that has been used. This accurate oval gear fuel counter meter is popular for the dispensing of oil in garage and workshop environments, as well as the low flow diesel transfer applications.  Due to the operating principle of the oval gears Piusi K400 provides high degree of accuracy when measuring and reduced loss of pressure.

There are two separate versions available of the Piusi K400 fuel flow meter; one for use with diesel and oil, and another for windscreen fluid.

The Piusi K600/4 Digital Fuel Flow Meter is designed for counting the amount of diesel or oil that has been dispensed and giving the user a visual indication of this on its electronic display. With a maximum flow rate of 150 litres per minute, this diesel flow meter is an ideal metering option for higher flow diesel transfer applications where larger quantities of fuel are being handled.

The Piusi K600/4 fuel counter meter is reliably manufactured in Italy and benefits from high levels of accuracy in its reading. These oil and diesel fuel flow meters also have an incorporated inlet filter to remove any large debris before it enters the meter body.

The Piusi K700 mechanical fuel flow meter uses an oval gear system to accurately measure the amount of diesel dispensed, even at higher flow rates, which is indicated on its large mechanical display. Thanks to its maximum flow rate of 220lpm, the K700 fuel counter meter is designed for higher flow applications where larger volumes of fuel may be required to be transferred. Manufactured in Italy by Piusi, this diesel flow meter is a durable solution that is easy to fit and calibrate, and comes complete with an inlet filter for removing large debris.

The diesel fuel flow meter’s body can also be rotated to allow the flow from four directions, which makes this Piusi flow meter a flexible solution for a range of installations.

The mechanical K150 ATEX high flow meter completes the PIUSI range dedicated to fuel measurement.

Perfect for heavy-duty environments -
The K150 ATEX high capacity mechanical meter is ideal for heavy-duty applications.

Perfect in the agricultural sector for refuelling heavy vehicles and machinery, the K150 ATEX high capacity mechanical meter is suitable for all those sectors that need to operate on vehicles with large tanks.

In addition to the agricultural sector, the K150 ATEX flow meter is also perfect in the Logistics industry for trucks and in the construction industry for earthmoving machinery.

Flow rate range from 25 to 150 l/min

The K150 ATEX high flow mechanical flow meter is equipped with an oscillating disc reading system that guarantees ±1% accuracy in measuring the fuel delivered at medium flow rates.

ATEX IECEx certified

The K150 mechanical flow meter meets the ATEX/IECEx requirements for the use of materials in potentially explosive atmospheres. The K150 ATEX can therefore be used for monitoring the flow of explosive liquids such as petrol and kerosene.

Up to 33% less pressure drop -
The K150 high capacity mechanical flow meter differs from other meters on the market, because it ensures up to 33% less pressure drop.

Resistant and reliable over time
At constant flow rates, the K150 high flow mechanical flow meter is accurate and reliable. Equipped with a 4-digit volumetric counter, it is simple to use easy to calibrate.

The high resistance to high pressures and wear is guaranteed by the robust aluminium body.

Compatibility with other fluids -
Diesel, B7, B20, Kerosene, Petrol, Petrol E20, Avgas 100/100LL, JetA/A1, Aspen 2/4

Not suitable for measuring products for the general public.

The range of PIUSI mechanical flow meters has been expanded with the new K150, the medium-high flow meter suitable for measuring fuel dispenses.

Suitable for heavy-duty environments
The K150 mechanical flow meter is specifically designed to be used where a high flow rate is required, for example in those sectors that need to operate on vehicles with large tanks.

The K150 is perfect in the agricultural sector for the supply of machinery and heavy vehicles, in the logistics sector for trucks, and in the construction sector for off-road vehicles.

Laboratory tested with 4 million litres delivered, the mechanical high flow K150 ensures a flow range between 25 and 150 l/min. The K150 differs from other PIUSI flow meters, including the K44 and K33 suitable for lower flow rates and the K700 suitable for flow rates up to 220 l/min.

Precision, a basic feature
Equipped with an oscillating disc reading system, the K150 high flow mechanical meter is accurate on the flow measurement Indication of the fuel delivered. This system also guarantees an accuracy of ±1% on the average flow rates.

Up to 33% less pressure drop
For professionals it is essential to have reliable and durable tools. The K150 high-flow meter stands out from other flow meters on the market because it guarantees up to 33% less pressure drop.

Resistance and reliability over time
The mechanical K150 high flow rate meter is an accurate product in presence of constant flows. It is easy to use and quick to calibrate. It is equipped with a 4-digit volumetric counter.

The robust aluminium body ensures great resistance to high pressures and wear. It has been designed to ensure constant calibration over time and low maintenance costs.

Not suitable for measuring products for the general public.

The K24 Turbine Fuel Pulse Meter is a digital turbine pulse meter, designed for measuring the transfer of diesel and flammable liquids such as petrol.

This K24 digitial pulse meter has an aluminium body making it very sturdy and durable, and is also bi-directional allowing the flow to be counted either way. These fuel flow meters with pulse output have no electronic display as they are used to interface consumption information with external management systems, or indicators allowing the information to be read and stored elsewhere. The K24 turbine pulse meter can be used in flammable environments, and is also for use with a non commercial fuel delivery pump either part of, or externally inline.

The Fill-Rite Series 900 mechanical fuel flow meter is a reliable solution for measuring how much diesel, petrol, kerosene and biodiesel up to B30 has been dispensed. It operates via a nutating disk system and clearly displays quantities up to 9999 litres on the fuel counter face. The face on this easy to install and calibrate diesel fuel flow meter is also able to be rotated 90 degrees to increase the flexibility of the installation.

Approved to EX II 2G c T6, the Series 900 fuel counter meter is certified safe for the dispensing of flammable liquids and the transfer of fuel in potentially explosive environments. These petrol and diesel flow meters are also capable of performing accurately in gravity as well as pump systems, thanks to its low minimum flow rate.

The K24 AdBlue™ pulse meter accurately measures the quantity of urea dispensed in an AdBlue pump installation.

These AdBlue - known as DEF in the US - digital turbine pulse meters are used to interface flow data with external systems, and therefore have no display to read off.

Flow rate: 6-100ltr Per Min

Fluid viscosity: 2-5.35 cSt

Pulses: 88 Per Ltr

Accuracy +/-1% after calibration

1" M BSP Inlet/Outlet c/w socket

The K24 Flow Meter is a digital flow meter with a turbine suitable for AdBlue monitoring and the digital management of the fluid being dispensed.

PRECISION AND QUALITY

The K24 digital AdBlue flow meter has been designed to monitor the flow of AdBlue. Easy to install, in-line or at the end of the dispensing pipe, The K24 has a display that can be applied in various positions to facilitate easy reading. The sturdy housing and sealed internal electronic board make it suitable for use in virtually all working conditions.

RELIABILITY

The K24 Digital Flow Meter has a plastic body with a polypropylene turbine. The pulse type is single-channel, reed switch. The electronic board with an LCD display shows a partial reading of 5 digits from 0.1 to 99999, for a total of 6 digits 1 to 999999 Total, resettable. The display also shows the supported flow rate, up to a maximum of 120 litres per minute.

The K24 AdBlue flow meter guarantees a metering accuracy of +/- 1%; if the metering turns out inaccurate, the K24 can always be calibrated to ensure maximum precision in its operation. With a pressure drop of < 0.03 bar at 120 l/min and a repeatability of 0.2 %, the K24 flow meter is powered by two AAA batteries. Thanks to its rotating display, the K24 can be adapted to any application and working condition.

The K600/3 is an electronic gear flow meter used for controling of the dispensing of fuels and anti-freeze liquid for non-commercial use. The K600/3 as an electronic flow meter shows on the display a partial total of 5 digits (h=11.5 mm) with floating point from 0.001 to 999.99 Total, not resettable to 8 digits (h=5 mm) from 1 to 99999999.

MADE IN PIUSI RELIABILITY

The K600/3 flow meter features acetal resin oval gears for monitoring the dispensing of diesel and other special fluids compatible with the construction materials. Equipped with an aluminium measuring chamber body, it consists of an integrated suction filter to ensure safe dispensing without impurities, which otherwise could cause unpleasant blocks while dispensing.

HIGH PRECISION

The K600/3 flow meter for diesel and anti-freeze liquid ensures a monitoring accuracy of +/- 0.5% for a maximum flow rate of 100 l/min.

These features complete the K600/3 flow meter:

Repeatability 0.2%

Pressure drop < 0.5 bar at the maximum flow rate.

The K24 ATEX/IECEx is the new flow meter for measuring the dispensed quantity of Gasoline, kerosene and diesel for non-commercial use.

ATEX/IECEx QUALITY

The digital flow meter for Gasoline, kerosene and diesel meets the ATEX/IECEx requirementsf or the use of materials in potentially explosive atmospheres. The K24 ATEX/IECEx has a sturdy aluminum body and a sealed electronic board, making it suitable for use in all working conditions.

Easy to install, in line or at the end of the dispensing pipe, it has a display that can be applied in various positions to facilitate reading. It is the ideal tool for managing the fluid dispensed.

The K33 ATEX is a mechanical flow meter suitable for the monitoring of diesel, gasoline and kerosene. For non-commercial use, the K33 ATEX meets the ATEX requirements for precise measurement of the quantity of Gasoline, kerosene and diesel dispensed in environments with a high risk of explosion.

The ATEX mechanical flow meter has a 3-digit partial indicator, and a 6 digit totaliser.

PRECISION AND QUALITY

The K33 ATEX mechanical flow meter for gasoline, kerosene and diesel has been designed to ensure precise measurement of the amount of fuel dispensed. Easy to calibrate and install, the K33 ATEX flow meter can monitor the quantity of fuel dispensed for a maximum flow rate of 20-120 l/min and with a maximum working pressure of the pump of 3.5 bar. In addition, it can guarantee a burst pressure of 28 bar with a metering accuracy of +/- 1%.

RELIABILITY

The K33 ATEX mechanical flow meter for gasoline, kerosene and diesel is suitable for application to pumps or gasoline dispensers and is suitable for those who are looking for a simple and economic product, without particular need for control over the fleet of vehicles. The K33 ATEX can be installed in any position on both rigid and flexible pipes, as well as directly on pumps or tanks. It can also be used by gravity, thanks to its low resistance to flow.

The K33 ATEX as an ATEX flow meter is included in group II, category 2 G IIB T=85°C (T6), and therefore it is suitable for working in areas classified as "1" and "2" according to directive 99/92/EC.