This Generator Store has been specifically designed to house most makes of generators and associated equipment. The units have large doors providing excellent access for installation and maintenance. There is also a personnel door fitted for daily access.

The Gen-Store line are of all steel construction and benefit from a built in spillage retention sump (which eliminates the need for additional interceptor trays). It also has an integrally fitted bulk storage tank which can be permanently piped to the generator. The Gen-Store line have the option to be accoustically lined, this allows none canopied sets to be fitted.

Features - 

Full width access doors for easy access, fitted with anti jam door pins, five lever dead locks and a removable anti ram bar.

High level exhaust outlet.

Filtered air intake / outlet.

Nose deflector plates on air intakes.

Light and thermostatically controlled heat extractor fan.

Removable step (for transportation)

Built in Fork lift points

Certified Lifting eyes.

Acoustically insulated to between 70 / 90  dbA @ 1mtr subject to equipment fitted.

All steel constructed road towable bowser, fitted with auto reverse brakes, Hydraulically clamped over run hitch, mud guards, mud flaps, rear and side lights, jockey wheel and interchangeable tow hitch / eye. Fitted with a mild steel rigid container (IBC) with steel portable bund, with top lifting facility. Fully removable outer lid with hinged lid providing full access to internal IBC. Both the inner and outer tanks are constructed from mild steel plate to BS EN 10025.  The inner tank providing the required storage area, the outer tank forms the required bund, with capacity of 110% of the total liquid being stored and facilitates any distribution pumps required.

Compliancy:

Certified in accordance with Directive 2007/46/EC European Community Whole Vehicle Type Approval (ECWVTA)

EC type-approval number: e11*2007/46*0645*00

Certified to UN 1202 (for road haulage) Certificate No:  5262

Issue number and date: 03     01/02/2011

Packaging Type: 31A

Description: Rigid, steel intermediate bulk container for liquids.

Mark number: 31A /Z/ **  ** /GB / TURNERS-5262 / 1899 / 1060

BS799 part 5 - Oil Pollution Prevention Guidelines (England & Wales) 200 - PPG2

All steel constructed towable bowser, fitted with auto reverse brakes, Hydraulically clamped over run hitch, mud guards, mud flaps, rear and side lights, jockey wheel and interchangeable tow hitch / eye. Fitted with a mild steel rigid container (IBC) with steel portable bund, with top lifting facility. Fully removable outer lid with hinged lid providing full access to internal IBC. Both the inner and outer tanks are constructed from mild steel plate to BS EN 10025.  The inner tank providing the required storage area, the outer tank forms the required bund, with capacity of 110% of the total liquid being stored and facilitates any distribution pumps required.

Compliancy:

Certified to UN 1202 (for road haulage)

Packaging Type: 31A

Description: Rigid, steel intermediate bulk container for liquids.

BS799 part 5 - Oil Pollution Prevention Guidelines (England & Wales) 200 - PPG2

Manufactured in the UK from Mild Steel Plate, this Steel Bunded Heating Oil Tank is suitable for the storage of most fuels and light oils.

Included with this Bunded Oil Tank is -

Float Type Bund Gauge

Float Type Tank Contents Gauge

2" BSP Fill Point with Cap

2" BSP Tank Vent with Cap

1" BSP Base feed with Isolation Valve

1" BSP Return Point

Top Lift points (Lift empty only)

1" BSP Spare socket into bund

10 Year Guarantee

Optional Extras -

Top Feed Outlet

Fill Point Cabinet

Overfill Valve

Electronic Tank Gauges

Selenoid Valves

Day Tank Controllers

Pump Kits

Low Level Fill Points

This self bunding, steel oil storage tank is manufactured to comply with all current regulations.
Suitable for above ground instillations at Domestic, Commercial, Agricultural and industrial locations for storage of Paraffin, Kerosene, diesel oils and light lubricant oils.

Both the inner and outer tanks are constructed from mild steel plate to BS EN 10025.The inner tank providing the required storage area, the outer tank forms the required bund, with capacity of 110% of the total liquid being stored.

The tank vent is piped into the bund then to atmosphere further reducing the risk of spills in the event of overfilling the tank. Tanks are fitted with steel base supports to eliminate ground contact with the tank base. The tanks can also be fitted with steel legs to raise of the floor for gravity feed applications

Compliancy: BS799 part 5, Control of pollution (oil storage) (England) Regulations 2001, PPG2, PPG26.