Diesel Transfer Pumps

The Hytek High Flow Diesel Transfer Pump is a low cost, high quality Fuel pump. The pump is suitable for Diesel or Biodiesel up to B100. 

Hytek 230v Diesel Pump Specification -

Self Priming, Direct Drive Vane Pump

230v 50hz

On / Off Switch

IP55 Weather Protection

2 Metre Power Cable

1" Inlet / Outlet

Duty Cycle: 30 minutes

80 L/min or 100 L/min maximum flow rate

Integral Bypass valve & Filter

Suitable for Diesel or B100

2 Year Warranty

he SAMOA Polux Series of DC Vane Pumps are high quality self priming pumps manufactured in Spain. These pumps come in either 12v or 24v, with flow rates of 40lpm or 60lpm (Depending on model). The pump body is made of cast-iron with rustproof treatment, rotor of sintered steel and vanes of acetal resin. The pumps include a by-pass valve and a built in filter with easy access for cleaning. The pump can be mounted vertically or horizontally, has a carrying handle and 2m cable with crocodile clamps.

The Polux pump kit version has the additional benefit of coming with all fittings required for portable diesel transfer, including a Fuel nozzle and Delivery hose with the option for 2 metres of suction hose and a flow meter.

Inlet/outlet connection: 1" BSP (F) or flange coupling

Maximum suction lift: 2.5m

Pressure: 0.8 bar

Electric DC motor with IP55 protection, allow intermittent operation duty with maximum cycles of 30 minutes.

Voltage: 12v

Options

684 512 - 40lpm - 4 metre delivery hose, manual nozzle

684 951 - 40lpm - 4 metre delivery hose, manual nozzle & 2m Suction hose kit

684 514 - 40lpm - 4 metre delivery hose, manual Nozzle, 2m Suction hose kit & digital flow meter

684 461 - 60lpm - 4 metre delivery hose, automatic nozzle

684 465 - 60lpm - 4 metre delivery hose,automatic nozzle, 2m Suction hose kit & digital flow meter

The SAMOA Polaris Series transfer Pump is a self priming diesel pump with self-adjustable vanes, Pump body made of cast-iron with rustproof treatment, rotor of sintered steel and vanes of acetal resin.  The pumps include a by-pass valve and a built in filter with easy access for cleaning.  The pump can be mounted vertically or horizontally and has 1.8m cable with plug.

Inlet/outlet connection: 1" BSP (F) or flange coupling

Maximum suction lift: 2.5m

Pressure: 1.7 bar

230v - 50hz - 3 amp - 500 watt

Electric AC motor with IP55 protection, allow continuous operation duty.

On/off switch and fuse.

he SAMOA Polux Series of DC Vane Pumps are high quality self priming pumps manufactured in Spain. These pumps come in either 12v or 24v, with flow rates of 43lpm or 65lpm (Depending on model). The pump body is made of cast-iron with rustproof treatment, rotor of sintered steel and vanes of acetal resin. The pumps include a by-pass valve and a built in filter with easy access for cleaning. The pump can be mounted vertically or horizontally, has a carrying handle and 2m cable with crocodile clamps.

The Polux pump kit version has the additional benefit of coming with all fittings required for portable diesel transfer, including a Fuel nozzle and Delivery hose with the option for 2 metres of suction hose and a flow meter.

Inlet/outlet connection: 1" BSP (F) or flange coupling

Maximum suction lift: 2.5m

Pressure: 0.8 bar

Electric DC motor with IP55 protection, allow intermittent operation duty with maximum cycles of 30 minutes.

Voltage: 24v

Options

684 524 - 43lpm - 4 metre delivery hose, manual nozzle

684 526 - 43lpm - 4 metre delivery hose, manual nozzle & 2m Suction hose kit

684 527 - 43lpm - 4 metre delivery hose, manual Nozzle, 2m Suction hose kit & digital flow meter

684 460 - 65lpm - 4 metre delivery hose, automatic nozzle

684 464 - 65lpm - 4 metre delivery hose,automatic nozzle, 2m Suction hose kit & digital flow meter

The Piusi Premium Rotary Manual Diesel Pump is specially designed for the transfer of diesel from an IBC. This hand fuel pump is a perfect cost-effective dispensing solution where there is no access to power, or where the quantity dispensed is not high enough to warrant a more expensive electric pump. 

Carefully designed by the leading Italian manufacturer of fluid handling equipment, Piusi, this manual diesel pump has a higher specification compared to other hand pumps on the market. Built with Stainless Steel outer casing as opposed to plastic, this Piusi diesel transfer pump kit is more durable, giving it a longer life span. It also benefits from smooth operation thanks to its rolling handle grip and quality constructed internals. 

Designed specifically as an IBC fuel pump, this IBC plate mounted kit includes suction and delivery hose, with swivel dispensing spout with on/off valve to close off the hose to prevent dripping and it is ready to be installed straight away. This kit can be fitted to top or lower IBC bars, which makes it ideal for applications when the IBC is on a bund and fitting the hand diesel transfer pump to the top bar would be too high up to operate. 

The Piusibox DC portable diesel transfer pump is a mobile refuelling solution in a box. This handy and practical kit includes a DC powered Bypass 3000 24 or 12v fuel transfer pump, manual nozzle, delivery hose and suction hoses with a locking foot valve to reduce the risk of leaking. The pro version of the Piusibox refuelling pump also comes with a particle filter for removing any debris from the fuel. This Italian made 12 volt diesel transfer pump offers great high performance, due to its compactness, durability and ease of use. All the equipment comes virtually assembled for user convenience.

The easily transportable storage container is designed to protect the battery powered Piusi fuel pump from debris and dirt, and therefore prevents fuel contamination, whilst also protecting the environment against residue from the nozzle. These portable 24v and 12v diesel transfer pumps are therefore ideal for refuelling both agricultural and plant machinery, where the application may not be as clean.

The Piusi Panther diesel transfer pump kit is a high quality, reliable and ready to use electric fuel transfer pump ideal for both mobile and static applications where mains power is available. This 230v diesel transfer pump kit has been specifically designed as a portable solution for refuelling vehicles, fleet and machinery. The Piusi Panther pump kit is essentially made up of the market-leading Panther 56 diesel pump in a ready to dispense kit with a choice of a manual or automatic nozzle, delivery hose, suction hose and PTFE tape.

The Italian made Piusi Panther pump comes complete with both pump head and motor, an integrated bypass valve and a 100-micron internal filter that is easily accessible for cleaning. Thanks to its mechanical seal, this self-priming fuel transfer pump guarantee reliability, even at low temperatures. Due to its thermal motor overload protection and a simple on/off operating switch for easy operation, this electric fuel dispensing pump kit offers great high performance and can be used for continuous running operations.

The Piusi Vantage DC portable diesel transfer pump has been designed to satisfy the requirements for the on-board refuelling on plant machinery and equipment. Thanks to their new level of intelligence, these 24v and 12v fuel transfer pumps monitor their own operation and performance and slow the refuelling pump down as it gets hot. This Italian made 12v diesel transfer pump enables high performance, whilst protecting the user from unnecessary costs caused by overheating due to its intelligent monitoring. The Vantage DC diesel fuel transfer pump has an electronic control box which comes mounted as standard on top of the pump, but can be mounted remotely if required. The refuelling pump comes with an LED for monitoring operation status and stored memory events.

This cast iron, rotary vane 24 or 12 volt fuel transfer pump has an incorporated bypass valve and pump attachment support bracket. This Piusi fuel pump is innovative in design and compact in size, and with the optional accessories available, it can be mounted multiple ways.

The Piusi Panther DC portable diesel transfer pump kit is an ideal easy move, portable refuelling solution for when only battery power is available. Being 24v or 12v powered, this DC battery operated diesel fuel transfer pump has been designed for fitting to earthmoving machinery and mobile dispensers. This Italian made 12 volt diesel transfer pump is long-lasting product, that can guarantee high-performance. 

The Piusi diesel pump comes equipped with handle, cable and clips, hose, nozzle and strainer. The handle on this portable refuelling pump enables the user to transport this pump with ease. The 12v fuel transfer pump is a perfect portable solution for agriculture, construction and mining industries due to it not relying on mains power. 

If you have a mixed fleet of vehicles, some that run off a 12 volt battery and some that run off 24 volt, then we offer a dual voltage model of this fuel transfer pump kit.

The SAMOA Polaris Series transfer Pump is a self priming diesel pump with self-adjustable vanes, Pump body made of cast-iron with rustproof treatment, rotor of sintered steel and vanes of acetal resin. The pumps include a by-pass valve and a built in filter with easy access for cleaning.  The pump can be mounted vertically or horizontally and has 1.8m cable with plug.

Comes wih -

230v 50z Polaris 70 Transfer Pump

4 Metre Delivery Hose

Dispensing Nozzle (Manual or Automatic options)

Fittings

Inlet/outlet connection: 1" BSP (F) or flange coupling

Maximum suction lift: 2.5m

Pressure: 1.7 bar

230v - 50hz - 3 amp - 500 watt

Electric AC motor with IP55 protection, allow continuous operation duty.

On/off switch and fuse.

This high quality diesel transfer pump from FMT Swiss AG is manufactured from shock resistant Die-cast aluminium with extremely small tolerances. The small tolerances of this pump allow for great suction & pressure performance.

Fitted with an on/off switch, integral bypass & siphon protection, this 230v transfer pump is designed for a long service life and is capable of a 5 metre suction. The pump head is also rotatable 90 degrees in any direction, which gives the pump flexibility to be used in a wide range of applications.

This transfer pump from FMT has an encapsulated electric motor, which in case of extreme temperature fluctuations, largely prevents the formation of condensed water and of short-circuits resulting thereof.

Specification - 

Encapsulation of the electric motor, 

1.8 metre cable

1" BSP Inlet / Outlet

Self Priming Vane Pump

100 Litres per minute maximum flow rate

Up to 2.2 bar discharge pressure

5 Metre maximum suction height

Suitable for Fuel oils & Diesel

230v 50hz

Thermal Protection

IP54 Safety rating

FKM/NBR Seals

3 year warranty

The Pedrollo CK 50 is a high quality liquid ring pump manufactured in Italy. The CK series are suitable for use with Diesel, Clean water that doesn't contain any particles or with any liquids that aren't aggressive towards the materials the pump is made from.

Due to the specific principle of their operating performance, the Pedrollo CK 50 is an excellent solution in every case where a compact, self priming pump is required or where the fluid flow is irregular or contains air. 400v & model with bypass available on request.

Pump Body - Cast iron complete with threaded ports in compliance with ISO 228/1

Motor Bracket - Aluminium with brass insert (patented), reduces the risk of impeller seizure

Impeller - Brass star type with open radial vanes

Motor Shaft - Stainless steel EN 10088-3 - 1.4104

Mechanical Seal - Ceramic (stationary ring), Graphite (rotational ring) & Viton

Inlet / Outlet - 3/4" F BSP