Diesel Tank Equipment

The CTS Economy Tank Bund Alarm is an entry level, battery powered bunded fuel tank alarm system designed to alert of the presence of fluid between the inner tank and its outer bund. Essentially, its purpose is to detect and warn that either the inner tank has ruptured and is leaking, or that there is excess rain water within the tank's bund. This is a simple and cost effective solution if only a bund alert is required, and the customer is not concerned with being warned of a tank level scenario. Upon activation, a red LED will flash and a 90db alarm will sound to warn the user that the tank's bund needs to be cleared and checked whether there is a leak.

This fuel tank alarm, which comes in a weatherproof enclosure, features a test button that will activate the sounder to check the battery and a mute button to silence the sounder. Thanks to its simple operation, the battery will last in excess of 72 hours in full alarm mode, and approximately 2 years when in standby, making it ideal for sites that aren't always manned.

The CTS Economy Fuel Tank Level Alarm system is an entry level, battery powered solution for when only one alert is required. It is designed to indicate that the tank level has reached either a high or low state, with an integrated flashing red LED and a 90db sounder to warn the user that action will be required in due course. This simple and cost effective fuel tank alarm benefit from test and alarm mute functions, as well a battery life of over 72 hours when in full alarm mode, making it a solution for sites that are no always manned.

This fuel tank level alarm comes with three cut to size stickers for you to select and stick next to the LED, for making it clear to the user what the alarm siren is indicating. There are two labelled high and low, and one that is blank in case you wish to name it something else with permanent marker.

There is a version of this fuel tank alarm with probe for diesel and oil, and a version without a probe for use with a variety of fluids. A range of different tank level probes are available for fuel oil, waste oil, water and chemicals.

The CTS single channel fuel tank alarm system provides the user with the choice of setting the alarm to alert of either a high level, low level or bund leak depending upon their requirements. This level and bund alarm is a simple and cost effective solution when the user only requires to be alerted of one scenario, therefore making the multi-zone tank level alarm over-specified.

Available in either mains or battery power, the single channel fuel tank alarm has a clear, descriptive seven segment LED display that informs the user of the activated tank state. Both versions feature a test button that will activate the 90dB sounder and flash the display showing the current configuration of the tank level alarm, and a mute button to silence the sounder. The battery powered version has a low battery warning to give notice that the battery needs changing.

The mains powered version has the additional feature of a volt-free relay for connecting the fuel storage tank alarm to another piece of equipment on-site such as a building management system, or another mains powered single channel alarm allowing the alarm status to monitored remotely for example in the office. Whilst commonly used as a diesel tank alarm, it is also suitable for use with a range of fluids such as water, waste oil and chemicals

The CTS Battery Operated Multi-Compartment Fuel Tank Alarm system has three functions; to detect and warn of a fuel storage tank overfill, a high/low liquid level and a bund leak. If the tank level alarm identifies that any of these states have occurred, the zone in question will illuminate on the alarm’s screen, and a loud siren and flashing red light will go off. When its battery is low, this level bund alarm will sound a single beep every minute to alert the user of this.

Thanks to being battery powered, these fuel tank alarms are designed to be installed on isolated or portable systems, and each zone can be configured allowing the alarm to be customised by the installer. Options are available that come with three relays, allowing additional equipment to be connected to the tank level alarm such as larger alarm systems or building management systems for remote monitoring.

If you need a tank level alarm for a fluid other than diesel or light oil, also available are a water and chemical alarm probe, and a high viscosity oil tank level probe – which is also suitable for AdBlue as well as high viscosity oils.

The CTS Mains Operated Multi-Compartment Fuel Tank Alarm system has three functions; to detect and warn of a tank overfill, a high/low liquid level and a bund leak. If this fuel tank alarm identifies any of these issues, the zone in question will light up on the alarm’s screen, combined with an alarm sounder and flashing orange strobe, which provides the user with a clear warning of the activated tank state. Each zone can be configured in any of the three functions High, Low or Bund, enabling the complete customisation of these fuel tank alarms based upon the user's requirements with a very simple set of electrical jumpers.

Options are available complete with three relays, to allow external equipment to be connected to each zone of the tank level alarm such as building management system for remote monitoring. This level and bund alarm also has the additional feature of controlling the pump from the relays (if fitted). When the fuel storage tank contents are 'low', the pump switches on and stays on until 'high' is reached.

If you require a tank level alarm for something other than diesel or light oil, we also supply a water and chemical alarm probe, and a high viscosity oil tank level probe – which is also suitable for AdBlue as well as high viscosity oils.

The SpillStop 2” Overfill Prevention Valve protects both the environment and the individual from the effects of fuel spillage. This overfill protection device is suitable for use on both fuel and diesel storage tanks, which may have a pumping or gravity feed system. Once the tank has reached its maximum fuel capacity, this valve will close to prevent any additional fuel from being delivered, thus preventing overfilling. A version of this can be supplied specifically for use on plastic tanks.

Flow Rate Range (Litres per minute) - 35-600

Pressure Range (Bar) - 0.15-6

Working Temperature - -20/+50ºc